Welcome To our shop !

Domus Corner-16 16X16MM 3M C/W Opal Rnd Dif

$35.2 $44
SKU: KO80391096050
Availability: in Stock

The Domus CORNER-16 is a 45 corner-mounting aluminium LED profile 16 16mm, supplied in 3m lengths with anopal round diffuser. Anodised aluminium, black or white. This item is made to…

Qty:

The Domus CORNER-16 is a 45 corner-mounting aluminium LED profile 16 16mm, supplied in 3m lengths with anopal round diffuser. Anodised aluminium, black or white.

This item is made to order, cut to length

Domus does not hold this profile on a shelf. It is made to order and cut tothe length you need, and no standard lead time is published for it.

  • Confirm the lead time and availability with us before you order, not after. Domusasks for that specifically on this product.
  • Cut to length is the reason to want it. A profile supplied at your exact run lengthhas no joints and on a continuous lit line, a joint is the thing the eye finds.
  • Measure the run before ordering, not after the joinery is in. A cut-to-lengthprofile is made to your figure; if the figure is wrong there is no trimming it back into stock.
  • A made-to-order cut is normally not returnable the way a standard length is. Ask usto confirm the terms with your order.
What a corner profile does that no other profile can
  • It sits in a 45 internal corner where a wall meets a ceiling, where acabinet carcass meets a wall, along the back edge of a shelf.
  • Which throws light diagonally across both surfaces rather than straight down one.That is the effect a cove gives, from a component 16mm square.
  • It hides the strip completely from below. In a corner the extrusion is tucked intothe angle, so you see lit surfaces and no source at all.
  • And it needs no rebate or channel. A recessed profile needs the substrate routedout; this one just fixes into the corner which on existing joinery or a finished wall is thedifference between a job and a renovation.
  • The corner must be a real 45. On a plastered wall-to-ceiling junction with acoved or rounded finish it will not sit flat.
Almost nothing about this product is recorded

The record holds three fields material, bulb type and application andthere is no datasheet.

What is missing Why it matters
Internal channel width Which LED strip will actually fit inside it
Diffuser depth Whether a low-density strip will show as dots
Accessories End caps and mounting clips sold separately, and needed
Warranty Other Domus profiles record 3 years

The internal width is the one to settle before ordering. A 16mm externalprofile takes a narrower strip than its size suggests once the wall thickness is subtracted.Tell us which strip you are using and we will confirm it fits on a cut-to-orderitem that check is worth doing first.

Two record entries that are not true of an extrusion
  • Built-in LED as the bulb type. It is an aluminium extrusion with aplastic diffuser. The light is whatever strip you put in it, bought separately.
  • Indoor as the application. That field holds Indoor on340 of 342 Domus records and carries no information though for this product indoor is in factcorrect, since no IP rating is recorded.
Where it works
  • Wall-to-ceiling junctions, for a cove effect without building a cove.
  • Inside cabinetry and wardrobes, along the top back corner.
  • Under shelves and along the back edge of joinery, where the strip must not beseen.
  • Stair strings and skirting returns with a true 45 angle.
  • Not on a coved or rounded plaster junction it needs a real corner.
  • Not outdoors or in a wet area no IP rating is recorded.
Specifying it

45 corner-mounting LED profile. 16 16mm. Supplied in 3m lengths with an opalround diffuser. Finishes: anodised aluminium, black, white. Made to order and cut to length, with no published lead time confirm lead time andavailability with us BEFORE ordering, and note that a cut-to-order item is normally not returnable. No datasheet exists, and the internal channel width, diffuser depth, accessories and warranty are notrecorded tell us your strip and we will confirm the fit. Our record lists a bulb type; theprofile is a passive extrusion.

Supplied and supported by Lights For You.

Questions

How long will it take?

No lead time is published for this one, which is why Domus asks you to call and confirm rather than quoting a figure. It is made to order and cut to your length, so nothing is picked off a shelf. Contact us before ordering and we will get the current lead time and availability worth doing first, because a cut-to-order item is normally not returnable the way a standard length is.

What does a corner profile do that a normal one does not?

It sits in a 45 internal corner and throws light diagonally across both surfaces, rather than straight down one. That gives you the effect of a cove from a component 16mm square, without building a cove. It also hides the strip completely from below tucked into the angle, you see the lit surfaces and no source at all. And unlike a recessed profile it needs no routed channel, which on finished joinery or an existing wall is the difference between a job and a renovation.

Which LED strip fits inside it?

Ask us before ordering, because the internal channel width is not recorded and there is no datasheet. A 16mm external profile takes a narrower strip than its size suggests once the wall thickness is subtracted. Tell us which strip you are planning to use and we will confirm it fits on a cut-to-order item that check is worth doing first rather than discovering it when the profile arrives at your exact length.

Will it hide the individual LEDs?

The opal diffuser is there to, and in a corner it helps further because you never see the profile face-on. But it depends on the strip: a low-density strip behind a shallow diffuser can still show dotting, and the diffuser depth is not recorded here. Tell us the strip and we will say whether the combination will read as a smooth line.

Can I use it on a plastered wall-to-ceiling junction?

Only if it is a genuine sharp 45 corner. Many plastered junctions are slightly coved or rounded, and the profile will not sit flat against those you get a gap along one edge that light escapes through, which is exactly what you were trying to avoid. Check the actual junction before ordering, particularly in an older building.

What accessories do I need?

Not recorded on this listing, but in practice you will need end caps for each finished run and mounting clips at regular centres. Other Domus profiles sell these individually. Ask us and we will put the list together with the profile a cut-to-length order that arrives without end caps is a frustrating half-finished job.

Does the profile itself light up?

No. Our record lists a bulb type of “Built-in LED” and that is wrong it is an aluminium extrusion with a plastic diffuser, and the light is whatever LED strip you put inside it, bought separately. That entry does not affect what you receive, but it is the sort of thing that puts a passive component in front of someone shopping for a light fitting.

Only logged in customers who have purchased this product may leave a review.

Shipping policy for our store

We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.

  • Fast shipping within 1-3 business days
  • Free shipping on orders over $40
  • 30 days money back guarantee
  • 24/7 online customer support
  • Secure packaging & safe delivery

Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.