Welcome To our shop !

Domus EMIT 55mm 2.5W 36 LED TRIO 12/24V Decklight

$35.995 $71.99
SKU: KO80391095935
Availability: in Stock

The Domus EMIT-55 is a 55mm inground light 2.5W,CREE LED, IP67, IK10, CRI 90, withnine fascia plates and four metalware finishes. Tri-colour3000 / 4000 / 5500K. The fascia you pick…

Qty:

The Domus EMIT-55 is a 55mm inground light 2.5W,CREE LED, IP67, IK10, CRI 90, withnine fascia plates and four metalware finishes. Tri-colour3000 / 4000 / 5500K.

The fascia you pick changes the output by 54 times
Fascia 3000K 4000K 5500K
Round Open 135lm 145 150
Square Open 135lm 145 150
Eyelid 80lm 85 88
Ring 28lm 28 28
Halo 22lm 22 22
2 Way 5.4lm 5.4 5.4
4 Way 4.4lm 4.4 4.4
3 Way 4.0lm 4.0 4.0
1 Way 2.5lm 2.5 2.5
  • Round Open against 1 Way is 54 times. Same fitting, same wattage thefascia is a dropdown choice, and nothing in the option names suggests the difference.
  • This listing records no lumen figure at all, so the table exists only on thedatasheet.
  • What the numbers actually mean: the open fascias let the whole 2.5W out andlight a surface; the multiway fascias emit through one to four narrow slots and aremarkers, not lights. They are meant to be seen, not to illuminate.
  • So decide what the fitting is for before you pick a fascia. Washing a wall oruplighting a tree needs Round or Square Open. Marking a path edge or a step needs a multiway or aHalo.
  • One oddity we cannot explain: the multiway figures are not in order 1Way2.5lm, 2Way 5.4, 3Way 4.0, 4Way 4.4. Flagged rather thanreconciled; if you are calculating to a lux level, ask us to confirm with Domus.
  • Note also that only the open and eyelid fascias gain output at cooler settings.The multiway, Halo and Ring figures are identical across all three colour temperatures.
The cutout changes if you add the cannister and the cannister is sold separately
  • 43mm without the cannister. 48mm with it.
  • The cannister is a variant of the separate EMIT 55mm Accessories listing, so thepart that changes the cutout is a different purchase and neither figure is in a productfield.
  • Decide before you cut. A 43mm hole cannot later accept a cannister withoutbeing opened out, and in a poured or paved surface that is not a small job.
  • What the cannister does is give the fitting a sealed sleeve to sit in, which keepssoil and water off the body and makes the fitting removable later. In a garden bed or a pavedarea it is usually worth having.
The beam angle is an accessory, not a fixed specification
  • 19 36 60, with 36 supplied as standard. The other two arelenses on the accessories listing.
  • So the beam can be changed after installation without lifting the fitting out ofthe ground which on an inground light is unusually useful, because you rarely know the rightangle until the planting has grown.
  • 19 for a tall narrow subject (a column, a palm trunk), 36 general,60 for a wide low subject (a shrub, a wall panel).
  • A honeycomb louvre and a linear lens are also available the honeycomb cutsglare when the fitting is walked past, the linear lens stretches the beam into an ellipse for a wall ora hedge.
Specifying it
  • IP67 and IK10 IK10 is the top impact rating, which on afitting set into a surface people walk and drive over is the specification that matters as much as theIP.
  • CRI 90 high, and it earns its keep on planting and stonework.
  • 2.5W, 12 or 24V DC. 50,000hrs. Not dimmable.
  • Requires a 12 or 24V constant-voltage LED driver, wired in parallel. The sheet notes it works with an AC/DC driver but recommends a Domus DC driver.
  • Our record holds two colour temperatures (3000K and 4000K); the fittingswitches three.
  • No warranty recorded.
Where it works
  • Uplighting trees, columns and walls with an open fascia.
  • Marking paths, steps and driveways with a multiway or Halo fascia.
  • Paved and trafficked areas IK10.
  • Not with a multiway fascia where you need light 2.5lm is amarker.
  • Not cut to 43mm if a cannister may be wanted later.
Specifying it

55mm inground light. Cutout 43mm without cannister, 48mm with. 2.5W,12 or 24V DC. CREE LED. Tri-colour 3000 / 4000 / 5500K. CRI 90. Beam 19 / 36 / 60, 36standard. IP67, IK10. 50,000hrs. Nine fascias; four metalware finishes. Not dimmable. A 12 or 24V constant-voltage driver is required and not included wire in parallel. Output varies 54 by fascia (135lm Round Open to 2.5lm 1 Way) and no lumen figure isrecorded on the listing. Warranty: the datasheet gives 5 years and no product field carries it ask us to confirm with your order.

Supplied and supported by Lights For You.

Questions

How much light does it actually give?

It depends entirely on the fascia, and by far more than anyone expects from 135 lumens with the Round or Square Open plate down to 2.5 lumens with the 1 Way. That is a 54-fold difference from the same fitting at the same wattage, chosen from a dropdown that gives no hint. The open fascias let the whole 2.5W out and light a surface; the multiway fascias emit through narrow slots and are markers meant to be seen rather than to illuminate. Decide what the fitting is for before choosing.

Which fascia should I choose?

Ask what the light is doing. Uplighting a tree, a column or a wall needs Round Open or Square Open at 135lm. Marking a path edge, a step or a driveway line needs a multiway (2.55.4lm), a Halo (22lm) or a Ring (28lm) those are there to be seen, not to light anything. The Eyelid at 80lm sits between: a shielded wash where you want light without seeing the source. Tell us the job and we will pick it with you.

What size hole do I cut?

43mm without the cannister, 48mm with it and decide before you cut, because a 43mm hole cannot later accept a cannister without being opened out, which in a poured or paved surface is not a small job. The cannister is a variant of the separate EMIT 55mm Accessories listing, so the part that changes the cutout is a different purchase. Neither figure is in a product field; both are on the datasheet.

Do I need the cannister?

In a garden bed or a paved area, usually yes. It gives the fitting a sealed sleeve to sit in, which keeps soil and water off the body and more usefully makes the fitting removable later without digging. The cost is 5mm on the cutout, decided at the time you cut. If the fitting is going into a dry, accessible position, you can do without it.

Can I change the beam angle later?

Yes, and that is unusually useful on an inground light. Three angles are available 19, 36 and 60, with 36 supplied as standard and the other two are lenses on the accessories listing, so they can be swapped without lifting the fitting out of the ground. You rarely know the right angle until the planting has grown, so being able to change it is worth knowing about. Use 19 for a tall narrow subject like a palm trunk, 60 for a wide low one like a shrub.

Does it need a driver?

Yes a 12 or 24V constant-voltage LED driver, not included, wired in parallel. The datasheet notes it will work with an AC/DC driver but recommends a Domus DC one. Size the driver to the total load with about 20% headroom, and ask us about the cable at the same time: at low voltage, volt drop on a long garden run dims the far end.

Why do the multiway numbers not increase with the number of ways?

We do not know, and we would rather flag it than invent an explanation. The datasheet gives 1 Way 2.5lm, 2 Way 5.4lm, 3 Way 4.0lm and 4 Way 4.4lm so the 3 Way emits less than the 2 Way, which is not what you would expect. All four are marker outputs and the practical difference between them is the pattern of slots rather than the quantity of light, so it is unlikely to change a decision. If you are calculating to a lux level, ask us to confirm with Domus.

Only logged in customers who have purchased this product may leave a review.

Shipping policy for our store

We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.

  • Fast shipping within 1-3 business days
  • Free shipping on orders over $40
  • 30 days money back guarantee
  • 24/7 online customer support
  • Secure packaging & safe delivery

Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.