Your shopping cart is empty!
The Domus EXIT-WPBOX is an IP65 weatherproof housing that lets aceiling-mounted exit sign be installed in undercover outdoor areas clear and white polycarbonate, rated IK10. This is an accessory, and…
The Domus EXIT-WPBOX is an IP65 weatherproof housing that lets aceiling-mounted exit sign be installed in undercover outdoor areas clear and white polycarbonate, rated IK10.
This is an accessory, and it fits one thing. TheEXIT-WPBOX houses the EXIT-SM-24M ceiling-mounted exit sign series. It isnot a universal enclosure and it is not an exit sign there isno light in the box. If you are not already fitting an EXIT-SM-24M, ask us before ordering.
Exit signs are required in places that are outside but covered externalstairwells, breezeways, covered walkways, undercroft car parks, loading areas. A standard indoor exitsign in one of those positions will fail: not from rain landing on it, but fromhumidity, wind-driven damp and dust getting into the electronics over years.
The usual answers are to specify a purpose-built weatherproof sign, which is expensive and limitsyour choice, or to accept early failure. This box is the third answer:keep the standard sign and put a rated enclosure around it.
Why IK10 matters more than it sounds: the places that need an outdoor exit sign arealso the places where things get hit car parks, loading docks, stairwells, plant rooms. An exitsign is a life-safety fitting, and one cracked by a trolley or a ladder has stoppeddoing its job. IK10 is the specification that keeps it working, and it was on no page.
The box is clear over the legend and white around the body, so the sign readsnormally through it. That matters for compliance as much as for looks: an exit sign has to belegible at the required viewing distance, and an enclosure that tinted or obscured thelegend would compromise it.
Your certifier still signs off the installation. The enclosure does not changeyour obligations under AS/NZS2293 it lets a compliant sign survive where it otherwisewould not.
What we cannot tell you. The datasheet gives theIP65 rating and the IK10 rating, and does not record the box’sdimensions, weight, fixing centres or warranty. On an enclosure, the dimensions arewhat tell you whether it clears a beam or a duct.
Ask us before you set out a position and we will get the figures from Domus. Itssiblings in this catalogue carry three to five years; we will not state a warranty we do nothold.
Weatherproof surface-mounted housing for theEXIT-SM-24M ceiling-mounted exit sign series. Clear and whitepolycarbonate, so the legend reads normally through it.IP65 dust tight, protected against water jets.IK10 20joule impact, the top of the IK scale. Dimensions, weight, fixing centres and warranty are not recorded askus. The sign itself is a separate product. Installation and certification toAS/NZS2293 remain with your certifier.
Supplied and supported by Lights For You.
Is this an exit sign?
No it is an empty weatherproof housing. There is no light in the box. It exists to let a ceiling-mounted exit sign be used in an undercover outdoor area.
Which signs does it fit?
The EXIT-SM-24M ceiling-mounted exit sign series, and nothing else. It is not a universal enclosure, so if you are not already fitting an EXIT-SM-24M, ask us before ordering.
Why not just use an indoor sign outside?
It will fail not usually from rain landing on it, but from humidity, wind-driven damp and dust reaching the electronics over years. The alternatives are a purpose-built weatherproof sign, which is expensive and limits your choice, or accepting early failure. This box is the third answer: keep the standard sign and put a rated enclosure around it.
What does IK10 mean?
It is the top of the IK impact scale a 20 joule impact, which in practice is a 5kg mass dropped from 400mm. It matters because the places that need an outdoor exit sign are also the places where things get hit: car parks, loading docks, stairwells. An exit sign cracked by a trolley or a ladder has stopped doing its job.
Will it make the sign harder to read?
No the box is clear over the legend and white around the body, so the sign reads normally through it. That matters for compliance as well as looks, since an exit sign has to be legible at the required viewing distance.
Does it change my compliance obligations?
No. Your certifier still signs off the installation and AS/NZS 2293 still applies. The enclosure lets a compliant sign survive where it otherwise would not.
How big is it?
Not recorded, and we would rather say so than guess. The datasheet gives the IP65 and IK10 ratings and not the dimensions, weight or fixing centres which on an enclosure are what tell you whether it clears a beam or a duct. Ask us and we will get them from Domus.
Only logged in customers who have purchased this product may leave a review.
We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.
Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.