Your shopping cart is empty!
The Domus KEY is a 3W MR11 LED globe 12VDC, 38 beam, 240lm, IP54, in6000K. Not dimmable.
| This listing (6000K) | 65016 (3000K) | |
|---|---|---|
| Sheet item table | 65016, 65017 | 65016, 65017 the same pair |
| Output | 240lm | 300lm |
| Warranty | None recorded | 3 Years |
| Diameter | Not recorded | 35mm |
The record says Indoor; the sheet says IP54 protected against dust and splashing water. That is a genuinely useful rating on a smalllamp, and it means this can go somewhere a bare MR11 could not: a covered step, a planter, a dampcabinet. The driver still has to be sited dry.
3W MR11 LED globe. 12V DC. 240lm. 38 beam. 6000K. CRI 80. IP54.35,000hrs. Not dimmable. THIS IS AN MR11 its record says MR16, and the two do not interchange (35mm against50mm). It requires a 12V DC CONSTANT-VOLTAGE driver, named on the datasheet and in no field it will not run on mains or on a halogen transformer. 6000K is a cold white; a 3000K versionexists. THIS LAMP PAIR HAS TWO DATASHEETS THAT DISAGREE 240lm here against 300lm on the3000K listing. Assume 240300lm. No warranty recorded here, though the 3000Kversion records 3 years ask us.
Supplied and supported by Lights For You.
Is it an MR11 or an MR16?
An MR11 the title, the model and the datasheet all say so. The lamp-type field says MR16, and that is wrong. It matters because they are different lamps: an MR11 is about 35mm across and an MR16 about 50mm, so an MR11 rattles in an MR16 fitting and an MR16 will not go into an MR11 one. This is a defect that ends in a returned part, which is why we are stating it rather than quietly publishing the right value. If your fitting takes MR16, tell us and we will send the right lamp.
What driver do I need?
A 12V DC constant-VOLTAGE LED driver, sized above your total lamp load the datasheet requires it and no product field mentions it. Two things it will not run on: mains, obviously, and an old halogen transformer, because those put out AC and expect a much larger load than a 3W lamp can provide. Also make sure it is constant-voltage rather than constant-current; the two are not interchangeable and the distinction is easy to miss. Tell us how many you are running and we will size it with you this is the commonest way a low-voltage LED installation goes wrong.
Is 6000K right for my project?
Probably not, if it is domestic or joinery. 6000K is a cold, blue-white light: it suits display of cool-toned goods, technical and inspection work, and marine or signage use, but it makes timber, food and warm materials look grey. The datasheet lists a 3000K version of the same lamp same beam, same output, completely different result. If this is going into cabinetry or a home, ask us for that one.
How much light does it give?
Between 240 and 300 lumens, and we would rather give you the range than a false precision. This lamp pair has two listings and two datasheets that each name both SKUs one pair described twice and they disagree by 25%: this one says 240lm and the 3000K listing says 300lm. We cannot tell which is right and we will not average them. Either way it is modest by design: an MR11 is a placement tool rather than a room light. At one metre the 38 beam lights a pool roughly 0.7m across, so aim it at something and plan on several which is also why sizing the driver correctly matters.
Why choose MR11 over MR16?
Size. An MR11 is about 35mm across against an MR16’s 50mm, so it hides where the larger lamp cannot display cases, shelving, joinery, plinths and step lighting. You give up output: 240 lumens here against several hundred from a typical MR16. If the fitting can take an MR16 and you need the light, that is the better lamp; if the constraint is the aperture, this is the one.
Can it go somewhere damp?
It is rated IP54 protected against dust and splashing water which is genuinely useful on a lamp this small and means it can go somewhere a bare MR11 could not: a covered step, a planter, a damp cabinet. The record says “Indoor”, but that field holds “Indoor” on 340 of 342 Domus records and carries no information; read the IP rating instead. The driver still has to be sited dry.
Can I dim it?
No it is explicitly non-dimmable, which is worth checking before you design a scheme around it. On a low-voltage run the dimming would have to happen at the driver in any case, and this lamp is not built for it. If you need dimmable low-voltage accent lighting, tell us what you are doing and we will suggest a lamp and driver combination that works together.
Only logged in customers who have purchased this product may leave a review.
We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.
Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.