Welcome To our shop !

Domus Maxi 50 2.4m Long Pendant Aluminium Dimmable 4k

$147 $512
SKU: KO80391095998
Availability: in Stock

The Domus Maxi 50 is a 2.4m suspended LED linear pendant 48W, 4800lm, 4000K atCRI90, dimmable, in an aluminium body, in six finishes. Made to order, and no lead time…

Qty:

The Domus Maxi 50 is a 2.4m suspended LED linear pendant 48W, 4800lm, 4000K atCRI90, dimmable, in an aluminium body, in six finishes.

Made to order, and no lead time is published

Domus asks you to call and confirm it. We will.

Can you join these into a continuous line? No and it is worth knowing early
  • This is a discrete PENDANT, not a jointable profile system. It is sold asa complete fitting at a fixed length, with its own suspension and its own supply.
  • Nothing in the range is described as a joiner, an end feed, a coupler or a continuous-runkit, and no listing mentions linking one fitting to the next.
  • So a specification calling for a continuous 7.2m run cannot be met bythree of these. You would get three 2.4m pendants with visible gaps and three setsof drops.
  • If a genuinely continuous line is the intent, ask us about the Domus MAX profilerange a different family sold as recessed, surface and suspendedprofiles. Note the confusingly similar name: the MAX-50 is not the Maxi 50 different SKU blocks, different wattages, and every MAX listing carries a datasheetwhere none of the 18 Maxi 50 listings does.
Designing a run of discrete pendants properly
  • Set the gap deliberately. Half a fitting length or more reads as arhythm; a small gap reads as a continuous run that failed to join the uncomfortable case, because it looks like a mistake rather than a choice.
  • And check the light as well as the look: the 120 beam spreads to roughly3.5 times the mounting height, so at 1m above the plane each fitting covers about3.5m and gaps up to about 1m keep the level even.
  • Keep the drops identical. Height variation across a row is more visiblethan spacing variation.
  • One finish per run, and order the run together made toorder, no lead time, and powder-coat batches vary.
What discrete pendants give you that a continuous line does not
  • Individual switching and dimming, if circuited separately you canlight half a room.
  • A failure affects one fitting, not the whole line which mattersbecause this is an integrated LED with no lamp, and a spare from the same batch is astraight swap.
  • And you can set the rhythm to suit the furniture rather than the other way round.
The published specification
Specification Value
Light output 4800lm 100lm/W
Colour rendering CRI90 at 4000K
Power / length 48W at 240V 2400mm
Beam 120, down only
IP rating IP20 dry interior only
Suspension 3m drop two points per fitting
Dimming DALI and emergency on request
Warranty 3 years, replacement
Joiners lifespan spacing weight Not offered / not published
Where it works
  • Four-person benching and 3.6m tables.
  • Runs of separate pendants with a deliberate rhythm.
  • Timber, concrete and exposed soffits.
  • Not as a continuous jointed line ask about the MAX profile range.
  • Not set out until we have the suspension spacing.
Specifying it

2.4m suspended LED linear pendant. 4800lm, 48W (100lm/W), 4000K,CRI90. IP20. 2400mm. 3m drop. PLEX-COB-20W strip, integral dimmable driver, DALI and emergencyon request. Anodised aluminium body. Six finishes. 3-year replacement warranty. Order codeMAXI-50-2.4M-A-4K. THESE DO NOT JOIN INTO A CONTINUOUS LINE. A discrete pendant at a fixed length with its ownsuspension and supply nothing in the range is a joiner, coupler or continuous-run kit. A specificationcalling for a continuous 7.2m run cannot be met by three of these. For a continuous line, ask about theDomus MAX profile range and note that MAX-50 is NOT the Maxi 50.

Supplied and supported by Lights For You.

Questions

Can I join several into a continuous line?

No. This is a discrete pendant rather than a jointable profile system sold as a complete fitting at a fixed length with its own suspension and supply and nothing in the range is described as a joiner, an end feed, a coupler or a continuous-run kit. A specification calling for a continuous 7.2m run cannot be met by three of these: you would get three 2.4m pendants with visible gaps and three sets of drops. That is a design decision rather than a defect, but one to make before the drawing is issued.

What should I use if I need a continuous line?

Ask us about the Domus MAX profile range a different product family sold as recessed, surface and suspended profiles, and the one designed for continuous runs. Note the confusingly similar name: the MAX-50 is not the Maxi 50. They are separate ranges with different SKU blocks and different wattages, and every MAX listing carries a datasheet where none of the 18 Maxi 50 listings does.

How should I space a run of these?

Deliberately, and check both the look and the light. Visually, half a fitting length or more reads as a rhythm while a small gap reads as a continuous run that failed to join the uncomfortable case, because it looks like a mistake rather than a choice. Optically, the 120 degree beam spreads to roughly 3.5 times the mounting height, so at 1m above the plane each fitting covers about 3.5m and gaps up to about 1m keep the level even.

What else makes a row look wrong?

Drop height and finish. Keep the drops identical a height variation across a row is more visible than a spacing variation. And use one finish per run, since Domus publishes one output figure per listing rather than one per finish, so a mismatch cannot be dimmed back into line.

What do discrete pendants give me that a continuous line does not?

Three things. Individual switching and dimming if you circuit them separately, so you can light half a room. A failure that affects one fitting rather than the whole line which matters because this is an integrated LED with no lamp, and a spare from the same batch is a straight swap. And the freedom to set the rhythm to suit the furniture rather than the other way round.

How many fixings will a run need?

Two suspension points per 2.4m fitting, so a run of three is six fixings into structure. The spacing is not published on any listing in the range, nor is the drop adjustment or the weight ask us for all three before setting out, because they are settled before the ceiling closes.

What load should I allow for a run?

48W per fitting at exactly 20.0 W/m, so a run of three is 144W and any mixed layout is total metres 20. That rule holds across every length and both linear ranges, because they all run the same strip.

Only logged in customers who have purchased this product may leave a review.

Shipping policy for our store

We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.

  • Fast shipping within 1-3 business days
  • Free shipping on orders over $40
  • 30 days money back guarantee
  • 24/7 online customer support
  • Secure packaging & safe delivery

Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.