The Domus LP-0809-RC is a recessed aluminium mounting profilefor LED strip supplied with a flat opal PMMA diffuser, end caps andmounting clips, in three finishes, cut to any length up to3m.

Read this first it does not light up on its own

• This is an extrusion, not a light fitting. C/W Opal Diff &Ec means complete with the diffuser and end caps NOT with an LEDstrip.
• You need two more things to get light, and Domus names both:Compatible Strip: PLEX-MICRO-8W and Driver Installation:Remote Driver Required.
• The driver is REMOTE there is no room for one in an 8mmchannel, so you must plan somewhere accessible to put it and a route for the low-voltagerun. In a stone benchtop or a sealed wardrobe that has to be decided before anything isbuilt.
• Sizing the driver: PLEX-MICRO-8W draws 8W per metre, so a full3m run is 24W take a 30W driver for headroom. A 1.5m run is 12W.

The title says 89 mm. The profile is 10.9 9.1 mm.

89mm is the STRIP CHANNEL the space inside. The profileitself measures W10.9mm H9.1mm, and that is the figure you routto. A groove cut at 8mm will not take it, and on a recessedprofile that is a joinery error you cannot correct after the fact. Set out at10.9mm, plus your tolerance.

What Domus publishes for this profile

Made to order, cut to length

No lead time is published. Call our team to confirm before ordering. Wewill. Cut lengths are not returnable in the ordinary way, so confirmthe measurement before it is cut, not after.

Where it works

• Under-bench and under-cabinet the shallow 9.1mm height suits a thin reveal.
• Wardrobes, shelving and laundries where the channel keeps dust and vapour off the LEDs.
• Anywhere the strip must read as a clean line rather than a row of dots.
• Not without a strip and a remote driver.
• Not in a groove cut to 8mm.

Specifying it

Recessed LED strip profile, extruded aluminium 6063, natural clear anodised / black / white.Flat opal PMMA diffuser. Profile W10.9mm H9.1mm, 89mm strip channel.3000mm continuous, cut to any length up to 3m, supplied per metre with end caps and mountingclips. Custom powder coat on request. SUPPLIED WITHOUT AN LED STRIP AND WITHOUT A DRIVER. Compatible strip PLEX-MICRO-8W (8W/m);remote driver required 24W over a full 3m run, so allow a 30W driver and an accessibleplace to put it. ROUT TO 10.9mm, NOT 8mm.

Supplied and supported by Lights For You.

Questions

Does this product light up on its own?

No and it is the first thing to understand. This is an aluminium extrusion, not a light fitting. “C/W Opal Diff & Ec” means complete with the opal diffuser and end caps, not complete with an LED strip. Domus names what you also need: a compatible PLEX-MICRO-8W strip, and a remote driver.

What driver do I need?

PLEX-MICRO-8W draws 8 watts per metre, so a full 3m run is 24W and a 30W driver gives sensible headroom. A 1.5m run is 12W. The driver is remote there is no room for one inside an 8mm channel so you need somewhere accessible to mount it and a route for the low-voltage run. In a stone benchtop or a sealed wardrobe that has to be decided before anything is built.

What size groove do I rout?

10.9mm wide, plus your tolerance. The 8x9mm in the title is the strip channel the space inside the profile while the profile itself measures W10.9mm x H9.1mm. That is the figure you set out to. A groove cut at 8mm will not take it, and on a recessed profile that is a joinery error you cannot correct afterwards.

Can I cut it to length?

Yes it is supplied per metre and can be cut to any length up to 3m, and it comes with end caps and mounting clips. It is made to order and cut to length, so confirm the measurement before it is cut rather than after; cut lengths are not returnable in the ordinary way. No lead time is published, so call us to confirm before ordering.

What finishes are available?

Natural clear anodised, black or white as standard. Custom powder coat colours are available on request, with surcharges. The diffuser is flat opal PMMA in all cases.

Why use a profile at all?

Three reasons Domus names. It conceals the strip so you see a line of light rather than the tape. It keeps the strip linear, so it does not wander or sag along a run. And it keeps the LEDs free of dust and vapour, which is what shortens strip life in a laundry or under a bench.

Recessed or surface mounted?

This is the recessed version, LP-0809-RC it sits in a routed groove and finishes flush, which is the cleaner result where the joinery can take it. The surface-mounted LP-0809-SM sits on the face and needs no groove, which is the answer for retrofit or where you cannot cut into the substrate.