Your shopping cart is empty!
The Domus OMEGA-17 SM is a surface-mounted aluminium LEDprofile 17 15mm, 3m, with a BLACKPMMA diffuser and end caps, in three finishes.
| Nova-17 | Omega-17 (this) | |
|---|---|---|
| Width | 17mm | 17mm identical |
| Depth | 7mm | 15mm |
| Projection from the face | 8mm barely visible | Roughly twice that |
| Dot blending | Most prone in the range | Best in the range |
| Recessed version | Yes | NONE |
| Diffuser part | The same one fits both |
Black reads as a dark line when off, where opal reads as a white stripe the right choice in a dark ceiling or a charcoal reveal. It costs output andDomus does not publish how much, but 15mm of depth gives it more to work with thana shallow profile would. 3m is the longest continuous piece.
No strip, no driver. Domus IP54 strip range.
| Specification | Value |
|---|---|
| Installation | Surface mounted only |
| Section | 17 15mm same width as the Nova-17, twice the depth |
| Length | 3m |
| Diffuser | Flat BLACK PMMA the same part fits the Nova-17 |
| Material / finish | Extruded aluminium aluminium, black or white |
| Supplied with | End caps |
| Order code | LP-1715-SM-B-3M |
| Recessed version | Does not exist |
| Strip / driver | Neither included |
No lead time is published. Call our team to confirm. We will.
Surface-mounted LED strip profile, 3m. 17 15mm. Flat black PMMA diffuser and endcaps. Extruded aluminium in aluminium, black or white. For the Domus IP54 strip range. Order codeLP-1715-SM-B-3M. SAME WIDTH AS THE NOVA-17, TWICE THE DEPTH and that is the whole point: 7mm against 15mm is thedifference between the profile most prone to dotting and the one that blends best. THE AWKWARD PART ISTHAT THE BEST-BLENDING PROFILE HAS NO RECESSED VERSION, so “flush and perfectly even” is not something thisrange offers. If you can surface-mount, take this. If it must be flush, take a recessed Nova-20 or 24and pay for a denser strip.
Supplied and supported by Lights For You.
How does it compare with the Nova-17?
Same width, twice the depth. Both are 17mm wide; the Nova is 7mm deep and the Omega is 15mm. Everything else about them is the same, including the diffuser which is why one spare part fits both. So the choice between them is a single question: how much reveal can you accept in exchange for how even a line.
Why does depth make the line more even?
Because a strip is a row of separate points of light. Close behind a diffuser they read as dots; further back they blend into a continuous line. Depth buys that distance, which is why the Omega at 15mm blends best in the range and the Nova-17 at 7mm is the most prone to dotting.
Can I have flush and perfectly even?
Not from this range, and that is the awkward part. The profile that blends best is the only one with no recessed version the Omega-17 is surface-mounted only. So those two wants point at different products.
What is the practical compromise?
In order of preference: if the run can be surface-mounted, take the Omega-17, because under a bench or inside a pelmet nobody measures the reveal. If it must be flush, take a recessed Nova-20 or Nova-24 at 11mm and pay for a denser strip, since more LEDs closer together blend at less depth. What not to do is take a recessed Nova-17 at 7mm with a cheap strip and expect an even line that is the combination that disappoints.
How much does it project from the face?
Roughly twice what a Nova-17 does the Nova sits about 8mm proud, this sits at around 15mm plus the mounting. Under a bench or inside a pelmet that is invisible. On a visible cabinet face it will read as applied rather than integral, which is the case where the shallower profile earns its keep.
Why the black diffuser?
For the off state black reads as a dark line where opal reads as a white stripe, which in a dark ceiling or a charcoal reveal is the whole point. It costs output and Domus does not publish how much, but 15mm of depth gives it more to work with than a shallow profile would.
Does it include a strip?
No, and no driver. It is complete with the black diffuser and end caps, for the Domus IP54 strip range. Tell us the run lengths and the number of separate runs the run count is what sets the end-cap requirement and we will quote everything together.
Only logged in customers who have purchased this product may leave a review.
We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.
Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.