Welcome To our shop !

Domus Pleo 10X10MM Bendable Profile P/M

$9.6 $12
SKU: KO80391096168
Availability: in Stock

The Domus PLEO 1010mm Bendable Profile is a bendable aluminiumchannel for LED strip and neon flex sold per metre, with mountingclips, in polished aluminium. Bendable AND square the only profile…

Qty:

The Domus PLEO 1010mm Bendable Profile is a bendable aluminiumchannel for LED strip and neon flex sold per metre, with mountingclips, in polished aluminium.

Bendable AND square the only profile here that can do both things at once
  • Two properties combine here that appear nowhere else in this catalogue. It BENDS, so it follows a curve you form yourself. And its section isSQUARE, so it presents the same face however it is rotated.
  • Together those let one continuous run curve in plan AND turn through 90 into a differentplane without ever looking like a different product. A line that sweeps along a curvedbar front, turns up the return and continues across the underside of a canopy is a single run of thisprofile.
  • With the 6.5 11 section the same run would change appearance at every turn, because a rectangular section rotated 90 presents a different width to the eye. With a rigid profile it would be several pieces with visible joints at each change ofdirection.
  • That is a genuinely capable thing, and nothing in the listing says it.
10 mm deep so it works with bare strip too

Neon flex needs no depth: it is a continuous diffused emitter and arrives as aline. But at 10mm this section also has enough depth for ORDINARY LED STRIP toblend into a line rather than showing as dots comparable to the Nova-20 andNova-24 at 11mm, and far better than the 8mm Nova-17. So it is themost flexible choice in the Pleo range: flex or strip, curved or straight, recessed or surface. No LED density guidance is published, so tell us the strip.

The bend radius, and forming it properly
  • The minimum bend radius is not published, and at 10 10mm this isthe largest Pleo section, so it will resist a tight curve most of the three. Ask us before committing to a radius.
  • Form it before the strip goes in; bend gradually along the length rather than sharply at apoint; work to a traced template; and measure the ARC rather than the chord when orderinglength. None of that is published either.
  • Buy a spare metre to test on. On a section this size that is thedifference between a clean sweep and a kinked one.
What is published
Specification Value
Section 10 10mm square, the largest Pleo
Form Bendable formed on site
Sold Per metre, cut to length
Mounting Recessed OR surface one part
Supplied with Mounting clips
Finish Polished aluminium powder coat on request
Lengths Customisable
Houses PLEO neon flex and bare strip blends at 10mm
MINIMUM BEND RADIUS Not published largest section, resists tightest
Strip / driver IP warranty Not published or not included
Made to order, cut to length

No lead time is published. Call our team to confirm. We will.

Where it works
  • Runs that curve AND change plane the only profile here that does both.
  • Curved bar fronts, canopies, circular features.
  • Bare strip on a curve 10mm blends it.
  • Not to a tight radius it is the stiffest of the three.
  • Not without a test piece on anything demanding.
Specifying it

Bendable aluminium LED profile, 10 10mm square section, sold per metre and cut to length.Recessed or surface mounted. Supplied with mounting clips. Polished aluminium, powder coat on request.Customisable lengths. Houses PLEO neon flex and compatible LED strip. Order code LP-1010-BD. BENDABLE AND SQUARE two properties that combine nowhere else in this catalogue. It follows acurve you form yourself, and its square section presents the same face however it is rotated. SO ONECONTINUOUS RUN CAN CURVE IN PLAN AND TURN THROUGH 90 INTO A DIFFERENT PLANE without ever looking like adifferent product. The minimum bend radius is not published, and this is the stiffest of the threesections buy a spare metre to test on.

Supplied and supported by Lights For You.

Questions

What can this do that the other profiles cannot?

Two things at once. It bends, so it follows a curve you form yourself. And its section is square, so it presents the same face however it is rotated. Together those let one continuous run curve in plan and turn through 90 degrees into a different plane without ever looking like a different product.

Can you give an example?

A line that sweeps along a curved bar front, turns up the return and continues across the underside of a canopy is a single run of this profile. With the 6.5 x 11 section the same run would change appearance at every turn, because a rectangular section rotated 90 degrees presents a different width to the eye. With a rigid profile it would be several pieces with visible joints at each change of direction.

Does it work with ordinary LED strip?

Yes, and that is worth knowing. Neon flex needs no depth it is a continuous diffused emitter and arrives as a line. But at 10mm this section also has enough depth for bare LED strip to blend rather than showing as dots, comparable to the Nova-20 and Nova-24 at 11mm and far better than the 8mm Nova-17. So it is the most flexible choice in the range: flex or strip, curved or straight, recessed or surface.

How tight can I bend it?

Not published and at 10 x 10mm this is the largest Pleo section, so it will resist a tight curve most of the three. Ask us before committing to a radius, and buy a spare metre to test on. On a section this size that is the difference between a clean sweep and a kinked one.

How should I form it?

Form it before the strip goes in, so nothing gets pinched. Bend gradually along the length rather than sharply at a point, because an even curve comes from many small movements and one firm pull produces a flat spot with a kink at each end. Work to a traced template rather than by eye. And measure the arc rather than the chord when ordering length.

Is any of that in the documentation?

None of it, including the minimum bend radius. The listing describes what the profile is and not how to use it, which on a formed-on-site product is the part that decides whether the job works. That is why it is worth a conversation before ordering rather than after.

Can I have it in a colour?

Yes polished aluminium is standard and powder coating is available on request to match a specified colour. Lengths are customisable too. Between finish, length, curve and mounting method very little is fixed before you order, which is why it is made to order.

Only logged in customers who have purchased this product may leave a review.

Shipping policy for our store

We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.

  • Fast shipping within 1-3 business days
  • Free shipping on orders over $40
  • 30 days money back guarantee
  • 24/7 online customer support
  • Secure packaging & safe delivery

Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.