Welcome To our shop !

DOMUS PLEO-14.4 NEON STRIP LIGHT

$28.495 $56.99
SKU: KO80391100855
Availability: in Stock

The Domus PLEO-14.4 Neon is a top-emitting LED neon flex 14.4W per metre, 11231253lm,CRI90, dimmable, in 3000, 4000 or 5000K. The one listing in this family with a complete, credible…

Qty:

The Domus PLEO-14.4 Neon is a top-emitting LED neon flex 14.4W per metre, 11231253lm,CRI90, dimmable, in 3000, 4000 or 5000K.

The one listing in this family with a complete, credible output set
  • It publishes 1123, 1253, 1253 and 1181lm at 14.4W 78 to 87lumens per watt. Ordinary, consistent and exactly what adiffused flex should achieve.
  • That matters beyond this page. Its side-view sibling publishes 320 to370lm at the same 14.4W 22 to 26lm/W which no LEDproduct achieves. Having a credible figure from the same family at the same wattage iswhat makes the other provably wrong rather than merely surprising.
  • Restore a dropped leading digit on the side-view set and it becomes 13201370lm,or 9295lm/W in line with this one. Reasoning, not confirmation, but the arithmetic only works one way.
Top view the default, and why
  • Top-emitting flex fires out of its FACE. It is the version you wantunless something specific pushes you to side view.
  • It suits a straight run, a cove that throws light up a wall or across a ceiling, and anycurve made in SECTION the flex bending the easy way, like a ribbon laid on its edge.
  • What it does not do is curve flat on a plane. Bent that way it twists,and the emitting face rolls over which is exactly the case side viewexists for.
  • Domus’s own framing: front-facing and side-facing to suit both horizontal and verticalillumination applications.
Two record faults it shares with its sibling
  • It publishes 220240V AND a current type of DC. Neon flex is24V DC; 220240V is the mains input to its driver. Wiring 240Vto a 24V flex destroys it.
  • It publishes 450 450 80mm as its dimensions identicalto the side-view listing, and a carton rather than a product. The flex itself is acontinuous strip of roughly 10mm section.
Dimmable and what that needs on a 24 V product

This listing states it is dimmable, which not all of the family does. But on a low-voltage product the dimming happens at the DRIVER, not at the flex so you need a dimmable 24V DC driver and a control that matches it. Neither is named here. A non-dimmable driver on a dimmable flex gives you anon-dimmable installation, and that is discovered at commissioning. Tell us the run and the control and we will quote both.

What is published
Specification Value
Load 14.4W per metre
Light output 1123 / 1253 / 1253 / 1181lm 7887lm/W
Colour rendering CRI90
Colour temperature 3000 / 4000 / 5000K
Emission Top view the default
Voltage 24V DC field says 220240V
Dimmable Yes needs a dimmable 24V driver
IP rating / beam IP66 120
Dimensions 450 450 80mm a carton
Warranty 3 years
Where it works
  • Ceiling and floor coves, window reveals the default choice.
  • Straight runs and curves in section.
  • Where output is calculated this listing’s figures are usable.
  • Not curved flat on a plane take side view.
  • Not on a non-dimmable driver if you want dimming.
Specifying it

Top-emitting LED neon flex. 14.4W per metre at 24V DC. 11231253lm.CRI90. 3000 / 4000 / 5000K. Dimmable. 120 beam. IP66. Polyurethane enclosure, mounting clipsincluded. 3-year warranty. THIS IS THE ONE LISTING IN THE FAMILY WITH A COMPLETE, CREDIBLE OUTPUT SET 78 to 87 lm/W,exactly what a diffused flex should achieve. AND THAT MATTERS BEYOND THIS PAGE: its side-view siblingpublishes 22 to 26 lm/W at the same wattage, and having a credible figure from the same family is whatmakes the other provably wrong rather than merely surprising. It shares two record faults: 220240 Vwith DC, and a carton in the dimensions field.

Supplied and supported by Lights For You.

Questions

How much light does it give?

1123 to 1253 lumens per metre at 14.4W 78 to 87 lumens per watt. That is ordinary, consistent and exactly what a diffused flex should achieve, which makes this the one listing in the family whose output figures you can calculate from directly.

Why does that matter beyond this page?

Because its side-view sibling publishes 320 to 370 lumens at the same 14.4W 22 to 26 lm/W, which no LED product achieves. Having a credible figure from the same family at the same wattage is what makes the other provably wrong rather than merely surprising. Restore a dropped leading digit there and it becomes 1320 to 1370 lumens, in line with this one.

Top view or side view?

Top view is the default it fires out of the face and suits a straight run, a cove throwing light up a wall or across a ceiling, and any curve made in section, with the flex bending the easy way like a ribbon on its edge. What it does not do is curve flat on a plane: bent that way it twists and the emitting face rolls over, which is exactly the case side view exists for.

Is it really a 240V product?

No 24V DC. The listing publishes 220240V and a current type of DC together, which are inconsistent, and eleven other listings in this family say 24V. The 220240V figure is the mains input to the driver. Wiring 240V to a 24V flex destroys it, so specify a 24V DC driver.

What are the 450 x 450 x 80mm dimensions?

A carton identical to the side-view listing’s, and not a flexible strip. The flex itself is a continuous product of roughly 10mm section. Its actual profile dimensions are not published on this listing.

How do I dim it?

At the driver, not at the flex. On a low-voltage product the dimming happens upstream, so you need a dimmable 24V DC driver and a control that matches it neither is named here. A non-dimmable driver on a dimmable flex gives you a non-dimmable installation, and that is discovered at commissioning. Tell us the run and the control and we will quote both.

Why choose flex over a strip in a profile?

Because the emitter is continuous and diffused along its whole length, so it reads as a solid line rather than a row of dots. With a bare strip in a channel you have to buy depth to blend the LEDs; with flex the line arrives already made and at CRI90 it is accurate enough to be real lighting rather than decoration.

Only logged in customers who have purchased this product may leave a review.

Shipping policy for our store

We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.

  • Fast shipping within 1-3 business days
  • Free shipping on orders over $40
  • 30 days money back guarantee
  • 24/7 online customer support
  • Secure packaging & safe delivery

Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.