Your shopping cart is empty!
The Domus PLEO 48mm Bendable Profile is a bendable aluminiumchannel for LED strip and neon flex sold per metre, with mountingclips, in polished aluminium.
Domus states this profile can be used in both recessed and surface mountedapplications. That is unusual here the Micro, Nova andOmega families all sell recessed and surface as separate products, which is where the NOVA-24 widthconflict came from. One part that does both removes the decision and theambiguity.
| Specification | Value |
|---|---|
| Section | 4 8mm the smallest Pleo |
| Form | Bendable formed on site |
| Sold | Per metre, cut to length |
| Mounting | Recessed OR surface one part does both |
| Supplied with | Mounting clips |
| Finish | Polished aluminium powder coat on request |
| Lengths | Customisable |
| Houses | PLEO neon flex and other compatible LED strip |
| MINIMUM BEND RADIUS | Not published the figure this product needs |
| Diffuser strip / driver IP warranty | Not published |
No lead time is published. Call our team to confirm. We will.
Bendable aluminium LED profile, 4 8mm, sold per metre and cut to length. Recessed orsurface mounted. Supplied with mounting clips. Polished aluminium, powder coat on request. Customisablelengths. Houses PLEO neon flex and compatible LED strip. Order code LP-0408-BD. IT BENDS, WHICH SOLVES A PROBLEM THE REST OF THIS CATALOGUE CANNOT every other Domus profileis a straight extrusion, and the factory-formed Maxi Curve pendant publishes no radius you can checkagainst your own geometry. HERE THE RADIUS IS YOURS. BUT THE MINIMUM BEND RADIUS IS NOT PUBLISHED, andbelow it an extrusion kinks rather than curves which makes it scrap. Ask us, and test a piece if thecurve is tight.
Supplied and supported by Lights For You.
What does “bendable” actually mean here?
That it is formed on site rather than in a factory. Every other aluminium profile Domus sells is a straight extrusion if you want a curved line of light from one, you buy the Maxi Curve pendant, which is a fixed factory-formed arc whose radius is not published anywhere. This profile takes whatever curve you have: a curved bar, a rounded reveal, a spiral stair soffit, a circular bulkhead.
Why is that better than a pre-formed curve?
Because the arc matches you rather than the other way round. With a factory-formed fitting you have to discover the supplier’s radius and then hope it suits your geometry. For anything with an irregular or one-off curve, forming on site is the only practical answer.
How tight can I bend it?
That is the one figure Domus does not publish, and it is the figure this product needs. Every bendable extrusion has a minimum radius below which it kinks rather than curves, and a kinked aluminium channel is scrap. At 4 x 8mm this is the smallest Pleo profile and will bend tightest of the three, but we cannot tell you how tight. Ask us before committing to a radius, and do a test piece if the curve is tight.
Do I still need to worry about seeing individual LEDs?
Not with neon flex, and that is the point of this family. Elsewhere in this catalogue the choice of profile is governed by depth the distance between the LEDs and the diffuser, which is what turns a row of points into a line. Neon flex is a continuous silicone-encased emitter, already diffused along its whole length, so it arrives as a line rather than becoming one inside a channel.
So could I use ordinary LED strip in it?
The description permits it it says the profile houses PLEO and “other compatible LED strip”. But then the depth question comes back, and at 4 x 8mm this would be the most dot-prone section in the range. Tell us which you intend to use, because it changes the advice completely.
Recessed or surface?
Either, from the same part Domus states it “can be used in both recessed and surface mounted applications”. That is unusual here: the Micro, Nova and Omega families all sell recessed and surface as separate products, which is where the NOVA-24 width conflict came from. One part that does both removes the decision and the ambiguity.
What finishes are available?
Polished aluminium as standard, and powder coat on request to match a specified colour. Lengths are customisable too, so between the finish, the length and the curve, very little about this profile is fixed before you order which is the reason it is made to order and why no lead time is published.
Only logged in customers who have purchased this product may leave a review.
We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.
Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.