Your shopping cart is empty!
The Domus PLEX-COB-20 is a 24V COB LED strip 20W per metre, 640 LEDs per metre, CRI90,IP54, 5m pack, in 3000, 4000 or 5000K.
| Strip | 5m load | Driver | Where it can live |
|---|---|---|---|
| PLEX-COB-5 | 25W | 30W | Inside joinery, behind a panel |
| PLEX-COB-10 | 50W | 60W | A cupboard or ceiling void |
| PLEX-COB-15 | 75W | 90W | A cupboard, ventilated |
| PLEX-COB-20 this one | 100W | 120W | Its own space ventilated and accessible |
The published single-feed limit is 5m for the range. At 20Wthat five metres carries 100W; at 5W it carries 25. So the strip with thehighest load gets the least distance per driver, and the drop across the run is worst because current scales with load. Treat 5m as a ceiling at this wattagerather than a comfortable figure, and ask us before running it full length.
Domus’s own framing: IP54 is indoor strip including wet areas. So kitchens, bathrooms and laundries are covered steam and splashing. What is not covered is water arriving with force or sitting: hosing, a mopped floor detail, anoutdoor position. Those want the IP67 version, which carries a siliconcoating and the cutting limitation that comes with it. For a normal kitchen bench, IP54is the right answer and the easier product.
| Specification | Value |
|---|---|
| Load | 20W per metre 100W for the pack |
| Driver | 120W needs its own ventilated space |
| Format | 5m pack exactly one run, no cuts |
| LED density | 640 per metre identical across all four wattages |
| Colour rendering | CRI90 |
| Colour temperature | 3000, 4000 or 5000K |
| IP rating | IP54 indoor including wet areas |
| Reach | Shortest in the range 5m is a ceiling here |
| Warranty beam dimmable | Not on this line 3 years, 180, yes |
| Driver | Required, not included |
No lead time is published. Call our team to confirm. We will.
COB LED strip, 5m pack. 20W per metre at 24V DC, 100W total. 640 LEDs permetre, dotless. CRI90. 3000, 4000 or 5000K. IP54. Driver required, approximately 120W. 20 W IS WHERE THE DRIVER STOPS BEING A DETAIL. Five metres at 5 W needs a 30 W driver you canhide in joinery; at 20 W it needs 120 W roughly a large paperback, generating real heat, wantingventilation and its own accessible space. THAT IS A JOINERY DECISION DISGUISED AS A BRIGHTNESS ONE, andnothing in the catalogue mentions it. THE TEST: is there a ventilated, accessible, dry space within abouttwo metres of the run?
Supplied and supported by Lights For You.
What driver does a 5 metre run need?
At 20W per metre, 100 watts of load, so a 120W driver. That is roughly the size of a large paperback, it generates real heat, and it wants ventilation. Compare the same five metres at the other wattages: 5W needs a 30W driver you can hide in joinery, 10W needs 60W, 15W needs 90W.
So the wattage changes where the driver goes?
Yes, and that is the point people miss. Somewhere between the 10W and 20W strips, the driver crosses from a thing you hide to a piece of equipment that needs planning. It is a joinery decision disguised as a brightness one, and nothing in the catalogue mentions it.
What test should I apply before ordering?
Is there a ventilated, accessible, dry space within about two metres of the run? If not, the 10W strip halves the problem and gives half the light which for most positions is still more than enough. Let the driver location influence the wattage rather than discovering the conflict on site.
Does 20W get less out of the run limit?
Yes. The published single-feed limit is 5 metres for the range, and at 20W that five metres carries 100W where at 5W it carries 25. So the strip with the highest load gets the least distance per driver, and the drop across the run is worst because current scales with load. Treat 5 metres as a ceiling at this wattage and ask us before running it full length.
What does IP54 cover?
Domus’s own framing is “indoor strip including wet areas” so kitchens, bathrooms and laundries, meaning steam and splashing. What it does not cover is water arriving with force or sitting: hosing, a mopped floor detail, an outdoor position. Those want the IP67 version, which carries a silicon coating and the cutting limitation that comes with it.
Should I take IP67 to be safe?
Not for a normal kitchen bench. IP54 is the right answer and the easier product the IP67 coating means every cut breaks the seal, so over-specifying costs you a constraint as well as money. Match the rating to what the position actually delivers.
Will it look different from the lower wattages?
No. All four PLEX-COB wattages carry the same 640 LEDs per metre and are equally dotless, so they look identical and differ only in output. That means you can mix wattages across a job 20W over the bench, 5W in the cove without any visual inconsistency.
Only logged in customers who have purchased this product may leave a review.
We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.
Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.