Your shopping cart is empty!
The Domus PLEX-COB Opposite Wiring Live Cable is a reversed-polaritystrip-to-driver connector 500mm tail, 5 pack, forsingle colour, tuneable, RGB, RGBTW or Micro strip. What opposite wiring is, and why you…
The Domus PLEX-COB Opposite Wiring Live Cable is a reversed-polaritystrip-to-driver connector 500mm tail, 5 pack, forsingle colour, tuneable, RGB, RGBTW or Micro strip.
Single colour, tuneable, RGB, RGBTW and Micro. They are notinterchangeable, because each strip type carries a different number of conductors two for single colour, three for tuneable, four for RGB, six for RGBTW. Tell us the strip and we will send the right one. Ordering by tail lengthalone is how the wrong variant arrives.
The family spans 500mm to 2m. 500mm suits a driver inthe same cabinet or immediately behind the detail which on a far-end feed is areal constraint, because the far end is the end furthest from wherever you put the firstdriver. If you are feeding both ends of a 10m run, you need driver locations atBOTH ends, and a 500mm tail gives you very little room to find one. The 2m tail versions exist for exactly this.
| Specification | Value |
|---|---|
| Function | Opposite wiring feeds a strip from the far end |
| What it enables | The published 10m both-ends run |
| Variants | Single colour tuneable RGB RGBTW Micro |
| Title | Names only Single Colour one of five |
| Tail | 500mm the shortest; 2m versions exist |
| Pack | 5 connectors |
| Installation | Solderless a pair of pliers 4.64kgf |
| Fits inside the profile | Yes |
| Colour temperature field | Publishes RGB on a five-type listing |
| Cross-reference from the strip page | None the 10m run and this connector never meet |
Domus flags this as made to order, so it is not held on a shelf. No leadtime is published. Call our team to confirm availability before ordering. Wewill. The flag also says “cut to length”, which comes from a generic sentence about theSTRIP a connector cannot be cut to length, and nothing about the lead timedepends on that.
Solderless opposite-wiring live cable connector for PLEX-COB LED strip, 500mm tail, 5 pack.Single colour, tuneable, RGB, RGBTW or Micro. Pliers only, no soldering. Pulling force 4.64kgf. Fitsinside the profile. AN LED STRIP HAS A DIRECTION its conductors run in a fixed order, so a standard connectorattached at the FAR end meets them mirrored and the polarity reverses. This one has the contacts reversedto match. AND THAT IS WHAT MAKES THE STRIP’S PUBLISHED 10 m BOTH-ENDS RUN ACHIEVABLE yet nothing on thestrip listing mentions it, and neither page points at the other. ITS TITLE ALSO NAMES ONLY “SingleColour” while it carries five types.
Supplied and supported by Lights For You.
What does “opposite wiring” mean?
That the contacts are reversed. An LED strip has a direction: its conductors run in a fixed order along its length, and a connector has to meet them in that order. A standard live cable is made to attach at one end attach the same connector at the other end and the conductors meet in mirror image, so the polarity reverses and on a multi-channel strip the colour channels swap. This connector is built to present the right conductor to the right pad from the far end.
When do I need one?
Whenever you feed a run from its far end and on this range that is not an edge case. The PLEX COB strip publishes a 5 metre limit from one feed and 10 metres fed from both ends. Doubling the run means feeding from the far end, and the far end is exactly where a standard connector would be mirrored. So this accessory is what makes the 10 metre figure achievable.
Is that connection made anywhere in the catalogue?
No. The 10 metre run figure is on the strip listing and this connector is on its own page, and neither points at the other. Someone reading the strip listing would plan a both-ends feed with no idea a special connector is required for it.
Why does the title say “Single Colour”?
It should not. The variants are Single Colour, Tuneable, RGB, RGBTW and Micro five types on one listing, with the title naming one. So a buyer searching for an opposite-wiring connector for an RGB strip has no reason to open a listing that says “Single Colour”, and would reasonably conclude one does not exist. It does.
Are the connector listings consistent?
No, and that compounds it. Two of them are single-type listings an RGB one and an RGB+TW one while this one and the straight joiner carry the type as a variant. So there is no single place to look and no consistent way to search across the accessory range.
Can I use any variant with any strip?
No. Each strip type carries a different number of conductors two for single colour, three for tuneable, four for RGB, six for RGBTW so the variants are not interchangeable. Tell us the strip and we will send the right one. Ordering by tail length alone is how the wrong variant arrives.
Is a 500mm tail long enough?
On a far-end feed it may not be. The family spans 500mm to 2m, and 500mm suits a driver in the same cabinet or immediately behind the detail. But the far end of a 10 metre run is the end furthest from wherever you put the first driver, so you need a second driver location there and 500mm gives you very little room to find one. The 2m tail versions exist for exactly this.
Only logged in customers who have purchased this product may leave a review.
We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.
Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.