Welcome To our shop !

Domus PLEX-COB Straight Strip To Strip Connector 5 Pack

$4.792 $5.99
SKU: KO80391096145
Availability: in Stock

The Domus PLEX-COB Straight Strip-to-Strip Connector is asolderless joiner 5 pack, for Micro, tuneable, RGB orRGBTW strip. Four variants, because each strip type has a different number of conductors This…

Qty:

The Domus PLEX-COB Straight Strip-to-Strip Connector is asolderless joiner 5 pack, for Micro, tuneable, RGB orRGBTW strip.

Four variants, because each strip type has a different number of conductors
  • This connector comes in four versions and they are NOT interchangeable. The reason is electrical: an LED strip carries one conductor per channel plus a common, and thechannel count differs by type.
Strip type Channels What the connector must carry
Single colour 1 Two conductors
Tuneable white 2 warm and cool Three
RGB 3 red, green, blue Four
RGBTW 5 RGB plus warm and cool Six the most of the four
  • So an RGB connector physically cannot serve an RGBTW strip it is two conductorsshort. And a connector with too many contacts on a simpler strip will not align withthe pads.
  • THE ORDERING RULE: match the connector to the STRIP TYPE, not to the job. Tell us which strip you are running and we will send the right variant.
  • This is also why the named controller has FIVE channels it issized for RGBTW, the most demanding of the family, so one controller covers them all.
Why a strip-to-strip connector matters more on COB than anywhere else
  • The PLEX COB strip has a published maximum run of 5m from one feed. Almost any real run is longer than that.
  • So joining is not an occasional repair on this product it is the normalcase. A 12m kitchen line is three sections and at least two joins.
  • Which makes two published facts about these connectors unusually valuable: they need no soldering (a pair of pliers), and they FIT INSIDE THE PROFILE.
  • That second one is the reason a joined run can still read as one line. A joiner that had to sit outside the channel would force a visible break at every 5m which on a dotless COB strip, chosen precisely for its continuity, would defeat thepoint.
Straight, and the shapes that are not

This is the STRAIGHT joiner: two lengths in line. Domus also listsL-SHAPED and FLEXIBLE strip-to-strip connectors but its own description saysthose are for the SINGLE COLOUR COB strip only. So on an RGB or tuneable run, a cornerhas to be made with a flylead cable rather than a rigid corner piece, and that changeshow a corner detail is built. Worth knowing before the joinery is drawn.

Two record faults

It publishes a colour temperature of RGB on a listing whose wholepoint is that it comes in four types. And it is flagged cut to length,which a connector cannot be.

What is published
Specification Value
Function Straight strip-to-strip joiner
Pack 5 connectors
Variants Micro tuneable RGB RGBTW not interchangeable
Installation Solderless a pair of pliers
Pulling force 4.64kgf
Fits inside the profile Yes so a join does not break the line
L-shaped / flexible versions Single-colour strip only
Suits IP54 COB strip IP67 not named
Colour temperature field Publishes RGB on a four-type listing
Conductor counts Not published they are why the variants exist
Made to order and the “cut to length” part is not about this product

Domus flags this as made to order, so it is not held on a shelf. No leadtime is published. Call our team to confirm availability before ordering. Wewill. The flag also says “cut to length”, which comes from a generic sentence about theSTRIP a connector cannot be cut to length, and nothing about the lead timedepends on that.

Where it works
  • Any COB run over 5m joining is the normal case.
  • Inside the profile the join stays in the channel.
  • Micro, tuneable, RGB or RGBTW strip matched variant.
  • Not a corner on RGB or tuneable L-shaped is single-colour only.
  • Not ordered without telling us the strip type.
Specifying it

Solderless straight strip-to-strip connector for PLEX-COB LED strip, 5 pack. Micro, tuneable,RGB or RGBTW. Attaches with pliers, no soldering. Pulling force 4.64kgf. Fits inside theprofile. FOUR VARIANTS BECAUSE EACH STRIP TYPE CARRIES A DIFFERENT NUMBER OF CONDUCTORS single colourneeds two, tuneable three, RGB four, and RGBTW six. An RGB connector physically cannot serve an RGBTWstrip. AND JOINING IS THE NORMAL CASE ON COB, NOT AN EXCEPTION: the strip’s published run limit is 5 mfrom one feed, so a 12 m kitchen line is three sections and two joins. That the connector fits INSIDE theprofile is what lets a joined run still read as one line.

Supplied and supported by Lights For You.

Questions

Why are there four different versions?

Because each strip type carries a different number of conductors, and they are not interchangeable. An LED strip has one conductor per channel plus a common: single colour is one channel and two conductors, tuneable white is two channels and three conductors, RGB is three and four, and RGBTW is five channels and six conductors.

What happens if I order the wrong one?

It will not work. An RGB connector physically cannot serve an RGBTW strip it is two conductors short. And a connector with too many contacts on a simpler strip will not align with the pads. Match the connector to the strip type, not to the job, and tell us which strip you are running.

Why does the named controller have five channels?

For the same reason. RGBTW is the most demanding type in the family at five channels, so a five-channel controller covers all of them single colour, tuneable, RGB and RGBTW. It is sized for the hardest case so one controller type serves a mixed project.

Why does joining matter so much on COB?

Because the PLEX COB strip has a published maximum run of 5 metres from one feed, and almost any real run is longer than that. So joining is not an occasional repair on this product it is the normal case. A 12 metre kitchen line is three sections and at least two joins.

Will the join show?

Not if the connector stays in the channel, and Domus states these fit inside the profile. That is the reason a joined run can still read as one line. A joiner that had to sit outside the channel would force a visible break every 5 metres which on a dotless COB strip, chosen precisely for its continuity, would defeat the point.

Can I turn a corner with it?

Not with this one it is the straight joiner, two lengths in line. Domus also lists L-shaped and flexible strip-to-strip connectors, but its own description says those are for the single colour COB strip only. So on an RGB or tuneable run, a corner has to be made with a flylead cable rather than a rigid corner piece, and that changes how a corner detail is built. Worth knowing before the joinery is drawn.

Do I need to solder?

No a pair of pliers, as with the rest of the PLEX-COB accessory range. Domus also publishes a pulling force of 4.64 kgf, which is roughly four and a half kilograms of straight pull, and very few accessories in any catalogue state a retention figure at all.

Only logged in customers who have purchased this product may leave a review.

Shipping policy for our store

We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.

  • Fast shipping within 1-3 business days
  • Free shipping on orders over $40
  • 30 days money back guarantee
  • 24/7 online customer support
  • Secure packaging & safe delivery

Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.