Your shopping cart is empty!
The Domus SUNSET-300-RND-SEN is a surface-mounted LED oyster with amicrowave sensor 300mm, 25W,2,5002,650lumens, IP54, IK10, ClassII, switchable 3000/4000/5700K. Identical to the emergency version, minus the emergency Same 25W, same 2,500…
The Domus SUNSET-300-RND-SEN is a surface-mounted LED oyster with amicrowave sensor 300mm, 25W,2,5002,650lumens, IP54, IK10, ClassII, switchable 3000/4000/5700K.
IK10 is the highest impact rating in common use a 20joule impact, roughly a5kg mass dropped 400mm. IN AN APARTMENT CORRIDOR, A CAR PARK OR A SCHOOL,FITTINGS ARE HIT BY FURNITURE, LADDERS AND SPORTS EQUIPMENT ROUTINELY. A polycarbonate IK10 body is what stops a common area needing a fitting replaced every fewmonths, and on a strata building the replacement labour costs more than the fitting everytime.
Double insulated, so it installs where there is no earth at the fitting. ON A REFIT OF AN OLDER COMMON AREA THAT IS OFTEN THE DECIDING PROPERTY a Class I metal fitting cannot legally go there without rewiring the circuit, and rewiring astrata common area is a project rather than a maintenance job. The polycarbonate body isa deliberate engineering choice, not a cost one.
The sheet says dimmable with remote control only. It cannot be dimmed from a wall dimmer, so a scheme assuming a dimmer circuit will notwork. AND ON A COMMON AREA THE REMOTE BECOMES BUILDING EQUIPMENT. Sensor settings, standby period and dim level all live in it, so if it is lost the fittings keeptheir last settings and become unadjustable. Ask us about the remote when you order,and make sure the building manager knows it exists.
3000, 4000 and 5700K, selected at installation. IN A COMMON AREA, 4000K IS USUALLY THE RIGHT ANSWER warm enoughnot to feel institutional, cool enough to read as clean and to give reasonable camera clarity if there isCCTV. Set every fitting in a corridor to the same temperature and record it, because a replacement fitting years later defaulting to a different setting is exactly how auniform run stops being uniform.
| Specification | Value |
|---|---|
| vs the emergency version | Identical but for the emergency function |
| So the choice is | A compliance decision, not a lighting one |
| Output / load | 2,500 / 2,650 / 2,600lm 25W |
| Sensor | Microwave area 100/75/50/25%, standby 0s / 1 / 10min |
| Through-wall triggering | Reduce the detection area a setting, not a fault |
| Impact / class | IK10 Class II, no earth required |
| IP / beam / CRI | IP54 120 CRI 80 |
| Colour temperatures | 3000 / 4000 / 5700K 4000K usually right in a common area |
| Dimming | Remote only and the remote holds the settings |
| Warranty | Not published |
Surface-mounted LED oyster with microwave sensor, 300mm. 25W, 2,5002,650lm,3000/4000/5700K switchable. CRI 80, 120 beam. IP54, IK10, Class II. Detection area 100/75/50/25%,standby 0s / 1min / 10min. Dimmable by remote control only. 50,000hrs. IT IS IDENTICAL TO THE EMERGENCY VERSION BUT FOR THE EMERGENCY FUNCTION same output, sameIP54, IK10 and Class II, same sensor and settings. SO THE CHOICE BETWEEN THEM IS A COMPLIANCE DECISIONRATHER THAN A LIGHTING ONE, which makes mixing them straightforward: a corridor needs emergency luminairesat specified intervals, not at every position, so a run can alternate between the two versions and lookcompletely uniform. Buying every position as an emergency fitting is the simplest order and usually anexpensive one.
Supplied and supported by Lights For You.
How does it differ from the emergency version?
Only in the emergency function. Same 25W, same 2,500 to 2,650 lumens, same IP54, IK10 and Class II, same microwave sensor with the same adjustable detection area and standby periods. So the choice between them is not a lighting decision at all it is a compliance one.
Can I mix the two versions?
Yes, and it is usually the sensible order. A corridor typically needs emergency luminaires at specified intervals rather than at every position, so a run can alternate between the two and look completely uniform, because they are the same fitting. Tell us the emergency spacing your certifier requires and we will split the order. Buying every position as an emergency fitting is the simplest order and usually an expensive one.
Why does it trigger when nobody is in the corridor?
Almost certainly through-wall detection. Microwave passes through plasterboard, so a corridor fitting near an apartment door can see movement inside the apartment. Reduce the detection area it is adjustable at 100%, 75%, 50% and 25%. That is the single most common complaint with microwave sensors and it is a setting, not a fault.
What standby period should I use?
In a stairwell, 10 minutes is usually right people move slowly and a light that drops out mid-flight is worse than one that runs a little longer. In a store room, 1 minute is enough. A daylight threshold is also published, so the fitting can be stopped from triggering during the day in a corridor with a window.
Is IK10 worth paying for?
In a common area, yes. It is the highest impact rating in common use roughly a 5kg mass dropped 400mm and in an apartment corridor, car park or school, fittings are hit by furniture, ladders and sports equipment routinely. A polycarbonate IK10 body is what stops a common area needing a fitting replaced every few months, and on a strata building the replacement labour costs more than the fitting every time.
What does Class II give me?
It installs where there is no earth at the fitting. On a refit of an older common area that is often the deciding property a Class I metal fitting cannot legally go there without rewiring the circuit, and rewiring a strata common area is a project rather than a maintenance job.
Why does the remote matter so much?
Because it holds the settings. Sensor detection area, standby period and dim level all live in it, so if it is lost the fittings keep their last settings and become unadjustable. It also cannot be dimmed from a wall dimmer at all. Ask us about the remote when you order, and make sure the building manager knows it exists.
Only logged in customers who have purchased this product may leave a review.
We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.
Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.