Your shopping cart is empty!
The Domus ZAC-PRO-8 recessed, 240V is a linear mains recessedstep light 226mm long, 240V AC,8W, 421495lumens, CRI 90,IP65, not dimmable, in black or white.
NO DRIVER TO SIZE, SITE OR REPLACE, AND NO VOLTAGE DROP TO CALCULATE. On a short run that is a real saving, and it removes the component most likely tofail an external driver usually goes years before the LEDs do. THE ARITHMETIC FLIPS ON A LONG RUN: ten mains fittings is ten mains connections against onedriver and ten easy joints. Roughly, mains wins below about four fittings. With the 8 W unit the crossover comes sooner, because at 8 W each a low-voltage run needs alarger driver anyway.
Most exterior step lights run CRI 70 to 80. AT CRI 90 SANDSTONE, BRICK,TIMBER AND RENDER KEEP THEIR COLOUR, and on a linear fitting that quality is spread across a whole treadrather than concentrated in a pool so the CRI is doing more visible workhere than on a round unit. The 120 beam covers about a metre of path from a 300mmmounting. Set 3000K outdoors. Its application field saysIndoor one of 78 IP65+ products that do.
| Specification | Value |
|---|---|
| Format | Linear, 226mm a band, not a pool |
| Which is a safety point | A pool leaves the tread EDGE dark |
| Cutout | 210 60mm without the box 220 70 with |
| In brickwork | 210mm crosses a mortar course ask the bricklayer |
| In poured concrete | Cast the box in at the pour |
| Depth | 53.5mm + box check single-skin walls |
| Dimmable | No and 495lm is bright at close range |
| If dimming matters | Take the 24V version whose record wrongly says 240V |
| Output / CRI / IP | 421 / 462 / 495lm CRI 90 IP65 120 |
| Rough crossover | Mains below ~4 fittings sooner at 8W |
Linear recessed LED step light, 226mm. 240V AC, 8W. 421/462/495lm at3000/4000/5000K switchable. CRI 90, 120 beam. IP65. Not dimmable. Cutout 210 60mm withoutthe recessed box, 220 70mm with. Depth 53.5mm. Cast aluminium, chromate-treated trim, TPScable gland. 50,000hrs. THE LINEAR FORMAT IS THE REASON TO CHOOSE IT, AND IT IS A SAFETY POINT AS MUCH AS AN AESTHETICONE: it washes a band across a tread where a round fitting throws a pool, and on a 1.2 m tread a poolleaves the edges dark which is precisely what people misjudge on a step. ITS 210 60 mm CUTOUT IS THELARGEST IN THE FAMILY AND A MASONRY DECISION: longer than a brick is tall, crossing a mortar course, andchanging to 220 70 mm if you fit the recessed box. IT DOES NOT DIM, which at 495 lumens is the thing toweigh the 24 V version does.
Supplied and supported by Lights For You.
Why the linear format?
It washes a band across a tread where a round fitting throws a pool, and on a 1.2m tread a pool leaves the edges dark which is precisely what people misjudge on a step. So the format is a safety decision as much as an aesthetic one. It also reads as architecture rather than as a fitting: a horizontal slot aligns with the horizontal of the stair itself, where a circle sits on the wall as a separate object.
Is it much brighter than the 5W?
About a third 421/462/495lm against 305/348/365 for 60% more power. So it is less efficient per lumen, and the spread rather than the output is what you are paying for.
What hole does it need?
210 x 60mm without the recessed box, 220 x 70mm with it the largest cutout in the family, and the accessory changes both dimensions, so the box decision must come before anyone cuts. Depth is 53.5mm plus the box; check that against the wall thickness, particularly on a single-skin wall where 70mm of box may be most of it.
Is it hard to install in brick?
It needs planning. A 210mm slot is longer than a standard brick is tall and crosses a mortar course, so in brickwork it is a cut through a joint rather than a hole in a face a conversation with the bricklayer, not only the electrician. In a poured concrete stair it wants the box cast in at the pour; coring a 210 x 60mm rectangle afterwards is genuinely difficult and usually looks it.
Can I dim it?
No. And on the 8W unit that costs more than on the 5W one, because 495 lumens across a tread is genuinely bright at close range and over-brightness is the commonest fault in low-level lighting. You are committing to a level you can only judge on site at night. The 24V version of this fitting does dim though note its record wrongly publishes 240V, one of 12 products with that fault.
Do all mains step lights lack dimming?
No. All 6 low-voltage step lights in the range dim, but 4 of 10 mains ones do too a tendency rather than a law. Check the individual product.
Why choose mains over the 24V version?
No driver to size, site or replace, and no voltage drop to calculate. On a short run that is a real saving, and it removes the component most likely to fail an external driver usually goes years before the LEDs do. The arithmetic flips on a longer run: ten mains fittings is ten mains connections against one driver and ten easy joints. Roughly mains wins below about four fittings, and with the 8W unit the crossover comes sooner because a low-voltage run at 8W each needs a larger driver anyway.
Only logged in customers who have purchased this product may leave a review.
We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.
Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.