The Fedor 600 is a 600 mm bollard with a sealed 5 W built-in LED, in polypowder-coated black aluminium. Havit describes it as a 1 directional fitting, so thelight leaves through a single aperture to mark an edge or a path rather than glowing all the way round.There is no lamp holder and no globe: the LED is part of the fitting, and the only thing you chooseafter installation is the colour temperature.

Havit publishes no data sheet and no installation sheet for this model

This is worth saying plainly, because most of the range has both. ForHV1660T Havit’s own page links no data sheet and no installation sheet,so everything below comes from that product page and nothing else. The mounting, sealing and sitingconditions that its larger relatives in this range carry are not stated for thismodel, and we have not assumed they carry across. Ask before you plan an installation aroundthem.

Choose the part number and you choose the supply

HV1660T-BLK-240V runs on 240 V AC mains and is wired straight intothe circuit. HV1660T-BLK-24V runs on 24 V DC and, in Havit’s words,must be used with a suitable 24 V DC LED driver do not connect it directly to 240 V.The body, the output and the finish are the same either way; only the supply differs, and it is adecision to make with the cable run rather than after it.

Output, and the setting that is actually brightest

Havit pairs the figures as 210 lm at 3000K, 215 lm at 4000K and205 lm at 5500K on a 5 W engine. 4000K is the brightest of thethree, so output does not climb as the light gets cooler and the list is not a ladder. This is amarker light rather than a floodlight: at around 210 lm it defines where a path goes, it does not lightthe garden.

Weather rating, and what is deliberately not stated

The body is IP65, which is the one environmental figure Havit publishes for thismodel. There is no impact rating, no beam angle, no protection class and no lamp-lifefigure on this page, and that is deliberate: no Havit document states them forHV1660T, and we would rather leave a gap you can ask about than print a number we cannot source. Havitalso lists anchor bolts as available for its bollards without giving a part number forthis model, so none is named here.

Colour temperature and warranty

The fitting is switchable across 3000K, 4000K and5500K. Havit does not publish where the switch sits on this model, so plan on makingthat selection at installation with the fitting in your hands. Lights For You has taken every figure onthis page for HV1660T from Havit’s own product page for these two part numbers, which states a3 Years Replacement Warranty, and from the store’s own variant records for the partnumbers and barcodes. There is no third document to check it against, which is why the gaps above areleft open rather than filled.

Questions

Is there a data sheet for this one?

No. Havit publishes no data sheet and no installation sheet for HV1660T its own page links neither. Everything on this page comes from that product page, which is why several specifications other bollards in the range publish are simply absent here.

What is the difference between the two part numbers?

The supply only. HV1660T-BLK-240V is 240 V AC mains. HV1660T-BLK-24V is 24 V DC and must run from a suitable 24 V DC LED driver. Same body, same output, same finish.

Is there a globe to replace?

No. The 5 W engine is a built-in LED no lamp holder, no socket and nothing to unscrew, so there is no replacement lamp and no maximum globe wattage to work to.

Which colour setting is the brightest?

4000K, at 215 lm. The other two are 210 lm at 3000K and 205 lm at 5500K, so output does not rise as the light gets cooler.

How bright is 210 lm in a garden?

It is a marker rather than a floodlight. At this output the fitting shows where a path or an edge runs and gives a soft pool at its base; it will not light a lawn or a driveway. If you need real output rather than a marker, the taller Fedor bollards carry a larger engine.

Why does this page not give an IP impact rating or a beam angle?

Because no Havit document states them for this model. We publish the IP65 weather rating Havit does give, and leave the rest open rather than borrowing figures from a different model in the range.

Can I use anchor bolts with it?

Havit lists anchor bolts as available for its bollard range on this product page, but does not give a part number for this model, so we have not named one. Check the fixing you need against the base before ordering.