Welcome To our shop !

HV1847T – Split 316 Stainless Steel 24w LED Inground Light

$145 $317.99
SKU: KO80391097364
Availability: in Stock

Split 316 stainless steel inground light 24W narrow beamA recessed inground uplight in 316 stainless steel, rated IP67 and IK10. It sets into the ground with the lens flush, so…

Qty:
Split 316 stainless steel inground light 24W narrow beam

A recessed inground uplight in 316 stainless steel, rated IP67 and IK10. It sets into the ground with the lens flush, so the fitting itself disappears and only the beam is seen the standard way to uplight a tree trunk, a wall, a column or a facade from below.

Two ratings define what this fitting can survive. IP67 covers temporary immersion, which is what an inground light actually experiences when the garden floods or a sprinkler pools around it. IK10 is the highest impact rating in Havit’s range, which matters because an inground light gets walked on, driven over and struck by mowers.

Why 316 stainless

316 is the grade specified for sustained contact with moisture, soil chemistry, fertiliser and pool water. A lesser stainless pits and stains in exactly those conditions, and an inground fitting is the hardest thing in a garden to replace once it is set in concrete.

Havit notes that 316 fittings still need regular cleaning to prevent tea staining the brown speckling that appears on stainless in coastal air. It is cosmetic rather than structural, and much easier to prevent than to remove.

Output and colour temperature

The fitting draws 24W and is tri-colour, with 3000K, 4000K or 5500K selected at installation rather than fixed at manufacture. Colour rendering is above 80 CRI.

The beam is 6 degrees extremely narrow, and the single most important thing to understand about this fitting. It throws a tight column straight up, which is what you want on a tall palm trunk, a chimney, a column or a multi-storey facade, and completely wrong for lighting a wide shrub or a low wall. Rated lamp expectancy is >30,000 hrs, and the fitting is not dimmable.

Power, cutout and installation

The Split runs on 12V DC and is a Class 3 low-voltage fitting, so no earth is required at the fitting. A 12V supply is required on the circuit and is not part of the fitting.

The fitting is 316 stainless steel with an aluminium body. Getting the canister set correctly is the whole installation: it needs drainage beneath it so water does not stand around the fitting, and the top has to finish flush with the final ground level not the level before the paving, turf or mulch goes down. An inground light sitting proud of a finished lawn is a trip hazard and a mower casualty. Installation is work for a licensed electrician.

Frequently asked questions

Can it be walked or driven on?

It carries an IK10 impact rating, the highest in the range. Confirm the load rating for your application with your electrician before driving over it.

Does it need a driver?

Yes. It runs on 12V DC and requires a low-voltage supply, which is not part of the fitting.

How narrow is the beam?

6 degrees a tight column rather than a wash. It suits tall trunks, columns and facades.

Does the stainless need maintenance?

Yes. Havit specifies regular cleaning of 316 stainless fittings to prevent tea staining.

Does it need an earth?

No. It is a Class 3 low-voltage fitting.

Only logged in customers who have purchased this product may leave a review.

Shipping policy for our store

We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.

  • Fast shipping within 1-3 business days
  • Free shipping on orders over $40
  • 30 days money back guarantee
  • 24/7 online customer support
  • Secure packaging & safe delivery

Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.