Your shopping cart is empty!
The black Patra is a small surface-mounted exterior wall light with a built-in LED behind clear glass, intended as a marker rather than a source of area light. Black is the finish that disappears: on a charcoal wall, a dark cladding or a shadow line the fitting reads as almost nothing by day and only the light is visible at night. At 1.5W it defines edges and steps rather than illuminating a space. It is 12V HV3284T-BLK-12V requires a 12V DC LED driver and must never be connected directly to 240V power.
This listing is the black finish. What is left to decide is the driver, the spacing and the colour temperature, which is selectable on the fitting: 100lm at 3000K, 110lm at 4000K and 105lm at 5500K. Warm 3000K keeps a residential feel along an alfresco wall; the cooler settings suit a more contemporary or functional read on a step run.
A 12V DC LED driver is required, and the fitting must sit no more than 25m from it a warranty limit, because voltage drop over a longer cable run reduces output and shortens LED life. Do not connect it directly to 240V. It is Class3 low voltage, so no earth is needed. The LED is built in: no globe is required and none can be fitted. It is rated IP65, with IP67 also recorded on the datasheet, so it handles direct rain and coastal weather. The diffuser is clear glass, impact rating IK08 and rated life over 30,000hours. It is Triac dimmable, which on a low-voltage circuit requires a Triac-dimmable driver.
Supplied by Lights For You black is the Patra finish that vanishes against dark cladding, so if your wall is pale, look at the white HV3284T-WHT-12V instead; either way the fitting needs a 12V driver within 25m.
Is a driver needed?
Yes. It is 12V DC and requires a 12V DC LED driver, supplied separately.
Can I wire it to 240V?
No. Never connect this fitting directly to 240V power. It runs on 12V DC only.
What is the maximum distance from the driver?
25m. Exceeding it causes voltage drop, dims the output and voids the warranty.
Is there a globe to replace?
No. The LED is built in, so no globe is needed or possible.
How much light does it give?
100lm at 3000K, 110lm at 4000K or 105lm at 5500K, from 1.5W. It is a marker light.
Is it dimmable?
Yes, Triac dimmable which on a 12V circuit means using a Triac-dimmable driver.
Can it go on an exposed wall?
Yes. It is IP65 rated, with IP67 also recorded, and carries an IK08 impact rating.
What warranty is included?
A 3-year replacement warranty.
Only logged in customers who have purchased this product may leave a review.
We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.
Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.