Your shopping cart is empty!
This is the brightest fitting on the platform and the top of the Lindri ladder. Its7 W built-in LED gives 430 lm at 3000K, 470 lm at 4000K and 450 lm at 5500K aroundfive times the 3 W Lindri and roughly double the 5 W from a wider 150 mm head. It isthe fitting to use where a shielded, low-glare bollard still has to light something properly: a widedriveway edge, a run of steps, the approach to a garage.
Unlike the 3 W and 5 W Lindri, this model is offered in a single finish aluminium with a poly powder-coated black finish. There is no brass option to weigh upand no price fork; you are choosing an output, not a material. The head keeps the range’s shieldedconstruction, so despite putting out more than four times the light of the smallest Lindri it holds thesame UGR <19 glare rating and the same downward beam. That is the argument forpaying more than a plain bollard costs: you are buying light on the ground rather than light in youreyes.
The 7 W Lindri runs on 24 V DC and requires a suitable 24 V DC LED driver. A largepart of the Havit garden range around it is 12 V DC, and the two cannot share a driver or a cable run this is the single most common ordering error on the range. Do not connect the fitting directly to240 V. Colour temperature is selected by connecting the labelled 3000K or 5500K neutral, or joining bothto produce 4000K, after which the joint is soldered and sealed in heat shrink. It is a permanent choicemade at installation rather than a setting you can revisit.
Lights For You would usually put one or two of these at the working end of a run and smaller fittingsthrough the rest tell us the job and we will suggest the mix.
How does it compare with the other Lindri sizes?
It is the brightest by a wide margin: 430 to 470 lm here, against 220 to 240 lm for the 5 W and 80 to 90 lm for the 3 W. The head is wider at 150 mm and the shielded construction and UGR <19 glare rating are the same throughout the range.
Is it available in antique brass?
No this size is black only. The 3 W and 5 W Lindri are offered in both a powder-coated aluminium black and a solid brass antique finish, but the 7 W comes in the aluminium black alone.
Can I put it on my existing 12 V garden circuit?
No. It is 24 V DC and needs a 24 V DC LED driver. Much of the Havit garden range is 12 V DC, so if you are extending an existing installation there is a real chance the driver is the wrong one confirm it before ordering.
How far can it be from the driver?
Up to 25 m, with the voltage at the fitting within 5% of its rating. Havit states that going beyond that voids the warranty, and at 7 W the volt drop along a low-voltage run is more significant than it is on the smaller fittings, so it is worth calculating properly.
How do I choose the colour temperature?
Your electrician selects it during installation by connecting the labelled 3000K or 5500K neutral conductor, or joining both for 4000K. The joint is then soldered and heat-shrunk to keep the fitting watertight, so it is not a setting you can change afterwards.
Can it be dimmed?
No. Havit lists it as not dimmable on both its data sheet and the installation instructions, and the LED is built in rather than a replaceable globe, so there is nothing to substitute.
Will a row of them look the same colour?
They should. Havit specifies CRI above 80 and SDCM under 6 for this fitting, which is the binning tolerance that keeps adjacent units from reading as different shades of white.
Only logged in customers who have purchased this product may leave a review.
We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.
Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.