The Loria 40 is a batten fix ceiling light with a400mm parchment shade, 140mm deep. It mounts straight onto astandard batten holder the tidy replacement for a bare ceiling fitting, with no rewiring.

This is the LARGE Loria, despite the listing name. It is400mm. The 300mm Loria is the small one, listedseparately.

It also takes a B22 bayonet globe, not an E27 screw. Most fittings in this range areE27, so a spare from the cupboard probably will not fit. No globe is supplied.

Batten fix means a swap, not a rewire

It attaches to the batten holder most Australian ceilings already have, so it replaces a plainfitting with no new wiring. A licensed electrician still does the swap DIY electrical work is not legal in Australia. That makes it one of the few genuine upgradesavailable in a rental.

Parchment gives a warm, soft light

The shade is parchment rather than glass, so it diffuses gently and warms the light. At400mm and only 140mm deep it covers a good area of ceiling while staying close toit which suits a standard room height.

Where it works

• Bedrooms and living rooms, replacing a plain batten holder.
• Rentals, where rewiring is not an option.
• Hallways and landings.
• Any room with a standard batten holder and a normal ceiling.

Specifying it

400mm, 140mm high, weighing 0.9kg, in iron and parchment.One B22 bayonet globe up to 60W, not supplied.IP20 indoor and dry locations only. Dimming is globe dependent.

Supplied and supported by Lights For You. Our sources disagree on the warranty term ask usbefore ordering if it matters and we will confirm it with the supplier.

Questions

Is this the small or the large Loria?

The large, at 400mm, despite the listing name. The 300mm version is the small one, listed separately.

What globe does it take?

A B22 bayonet globe up to 60W the push-and-twist base, NOT the E27 screw used by most fittings here. Not supplied.

What does “batten fix” mean?

It mounts onto the standard batten holder most Australian ceilings already have, so it replaces a plain fitting without rewiring.

How big is it?

400mm and 140mm deep, weighing 0.9kg.

What is the shade made of?

Parchment, which diffuses gently and warms the light softer than glass.

Is it dimmable?

Globe dependent fit a dimmable B22 globe and a compatible dimmer.

What is the warranty?

Our sources disagree one year in our record, three on the supplier sheet. Ask us and we will confirm.

The Loria is a batten fix light a 300mm parchment shade on aniron frame that mounts directly to a standard batten holder. That is the whole appeal: it replaces thebare ceiling fitting most Australian homes already have, with no rewiring.

This takes a B22 bayonet globe, not an E27 screw. Most fittingsin this range are E27. The Loria is B22 the push-and-twist base socheck what you have in the cupboard before assuming a spare will fit. No globe issupplied.

Batten fix means no rewiring

A batten fix fitting attaches to the existing batten holder, which is why it is the standard way toupgrade a plain ceiling light in a bedroom or hallway. It is a genuine like-for-like replacement ratherthan a rewire.

Parchment gives a warm, soft light

The shade is parchment rather than glass, so it diffuses gently and takes on a warm tone. At300mm and only 140mm deep it sits close to the ceiling and suits a standard roomheight.

Where it works

• Bedrooms and hallways, replacing a plain batten holder.
• Rentals, where the existing fitting is unattractive but rewiring is out.
• Studies and spare rooms needing a tidy, low-profile ceiling light.
• Any room with a standard batten holder and 2.4m ceilings.

Specifying it

300mm, 140mm high, weighing only 0.7kg, in iron and parchment, black withwhite. One B22 bayonet globe up to 60W, not supplied. It isIP20 indoor and dry locations only. Dimming is globe dependent.

Supplied and supported by Lights For You. Our sources disagree on the warranty term ask usbefore ordering if it matters and we will confirm it with the supplier.

Questions

What globe does it take?

A B22 bayonet globe the push-and-twist base, NOT the E27 screw base used by most fittings in this range. Up to 60W, and not supplied.

What does “batten fix” mean?

It mounts to the standard batten holder most Australian ceilings already have, so it replaces a plain fitting without rewiring.

Do I need an electrician?

It is designed as a like-for-like batten holder replacement. Any work on the ceiling wiring itself must be done by a licensed electrician.

How big is it?

300mm and 140mm deep, weighing 0.7kg.

What is the shade made of?

Parchment, which diffuses gently and gives a warm tone softer than a glass shade.

Is it dimmable?

Globe dependent fit a dimmable B22 globe and a compatible dimmer.

What is the warranty?

Our sources disagree one year in our record, three on the supplier sheet. Ask us and we will confirm.