The Maren SQ is a 44 44mm square recessed stair downlight 2W, 150lm, CRI above 90, three colour temperatures supplied withthree interchangeable frames.

Three frames in the box black, gold and white

You do not pick a finish at purchase: all three textured frames are supplied, andthey swap. So you can decide on site once the wall is painted, usedifferent frames in different rooms from one order, or change one later when the roomchanges. Nothing else in this range works that way.

Square, for orthogonal detailing

The same fitting is made round; this is the square. Against atiled riser, square-set render, or stair detailing with straight lines, a squarelines up with what is already there where a circle sits on top of it. Round for curvesand render, square for everything else.

Tiny a 44mm hole

44 44mm and 28mm deep. A very small cut-out, which matters twiceover: it goes into thin walls and shallow cavities where a 75mm step light willnot, and it is visually discreet a run down a staircase reads as a line ofsmall points rather than a row of fittings.

150 lumens is guidance, not illumination

It shows you where the step is. It will not light the stair. One every few treads ishow it is meant to be used, and at 2W each a run of ten draws20W.

CRI above 90 on a 2-watt fitting

Unusual at this size and genuinely useful: it is grazingtimber treads, tile, stone or carpet at close range, and colour accuracy is what stopsthose surfaces looking grey-green in the dark.

2700K is available and it is right on a stair

2700K, 3000K or 4000K, selected on the fitting. On a stair used atnight, the warmest setting disturbs dark-adapted eyes least, and 2700K is warmerthan most step lights offer.

IP20 indoor stairs only. Not rated for an external stepor a porch. ClassII double insulated, andnot dimmable.

Where it works

• Internal stair risers one every few treads.
• Tiled and square-set detailing, where a square lines up.
• Thin walls and shallow cavities.
• Hallway skirtings, as night guidance.

Specifying it

44 44mm, 28mm deep, in polycarbonate. Integrated2W LED giving 150lm, included, switchable2700/3000/4000K, CRI>90.Three interchangeable frames supplied black, gold and white.Not dimmable. 240V (220240V),ClassII double insulated, no earth required,IP20 indoor only. Warranty is three years, as a replacement warranty.

Supplied and supported by Lights For You.

Questions

Which frame colour do I choose?

None all three are supplied. Black, gold and white textured frames come in the box and swap, so you can decide on site once the wall is painted, or change one later.

Round or square?

Square lines up with tiled risers, square-set render and straight stair detailing, where a circle sits on top of it. Round suits curves and render.

What size hole does it need?

44 44mm, 28mm deep very small, so it fits thin walls and shallow cavities where a 75mm step light will not.

How bright is it?

150lm it shows you where the step is, it does not light the stair. Ten of them draw 20W.

Which colour temperature on a stair?

2700K, the warmest it disturbs dark-adapted eyes least at night, and it is warmer than most step lights offer.

Can it go on an outdoor step?

No. It is IP20 internal stairs only.

Can I dim it?

No.