Your shopping cart is empty!
This is the Maxi Louvre 900 in bare 316 stainless steel Havit’s 900 mm bollard witha clear diffuser fitted with louvres, and the metal left visible rather than powdercoated. It is the most exposed specification in the range in both senses: the louvres control where thelight goes, and the bare finish carries a maintenance obligation.
At 900 mm a bollard sits near eye level for anyone walking past it. Horizontal louvres across theclear diffuser block the direct sideways view of the lamp and push the light downward onto the path,which is the difference between a fitting you notice and a surface you can see. Use it along paths,driveway edges and seating areas. The plain Maxi 900 is the better choice when you want the fittingitself to glow. Output is identical either way the louvres redirect light rather than reduce it.
316 is the most corrosion-resistant metal in this range. Havit’s page for this SKU asks that it bemaintained every six months, or more frequently in coastal environments, to preserveappearance and warranty, and recommends its HV9971 maintenance kit. The issue istea staining the brown surface bloom that forms when salts and grime sit on stainlessundisturbed and Havit states that tea staining is not covered by warranty. Thelouvred head has more edges and shadowed faces than the plain one, so it is worth a little extraattention at each clean. If nobody will get to it, the poly powder coated black version of this samebollard is the more forgiving specification.
HV1618T-SS316-240V is 240 V AC, takes a 9 W E27globe, gives 700 lm / 720 lm / 740 lm, is Protection Class 1 andrequires an earth. HV1618T-SS316-12V is 12 V DC froma suitable 12 V DC LED driver, takes a 5 W MR16 globe, gives270 lm / 285 lm / 300 lm, and is Class 3 with no earth. On the 12 Vversion, Havit makes two conditions of warranty: voltage at the fitting within 5%, andno more than 25 m between fitting and driver. Multiple fittings on one driver are wiredin parallel, and Havit’s HV9507 and HV9508tri-colour MR16 drivers are the ones it lists for this range.
Colour temperature is tri-colour 3000K, 4000K or 5500K, set on a switch on the sideof the globe once the cover is twisted off anti-clockwise. Supplied globes are 120 and a replacementsets its own beam. Havit caps the fitting at a maximum globe wattage of 15 W, LED globesonly, and it is not dimmable with the globes supplied. CRI>80, lamp expectancy >30,000hrs. It stands 900 mmtall at 102 mm on a 98 mm base plate with four 6 mm fixingholes and a 16 mm cable entry, surface mounted onto concrete and never belowfinished ground level, with every hole siliconed a warranty condition.HV1607 is the optional spike. IP54, IK08.Lights For You publishes these figures for HV1618T-SS316 from the HV1618 APR24 data sheet, Havit’s12 V and 240 V installation instructions and the supplier’s own maintenance advice for the barestainless finish, with Havit’s 3 Years Replacement warranty after 01/01/22.
Why choose the louvred version?
Because of where the light goes. Horizontal louvres across the clear diffuser stop you seeing the lamp from the side and direct more of the output downward onto the path. On a walkway, a driveway edge or beside seating that means less glare and a better-lit surface. The plain Maxi 900 is the one to pick if you want the bollard itself to read as a column of light.
Is it dimmer than the plain version?
No. Havit publishes the same 700 lm / 720 lm / 740 lm on 240 V and 270 lm / 285 lm / 300 lm on 12 V for both. The louvres redirect the light rather than absorb the lamp’s output.
How often does the bare stainless need cleaning?
Havit’s own page for this SKU says every six months, and more frequently in coastal environments, with its HV9971 maintenance kit. The louvred head has more edges than the plain one, so give it a little longer at each clean. Left undone, tea staining forms, and Havit does not cover tea staining under warranty.
Should I take stainless or black?
Same fitting, same output, same price. Bare 316 stainless if you want the metal visible and the six-monthly clean will actually happen; poly powder coated black if it is going somewhere awkward to reach or you would rather it disappear.
Which one needs an earth?
The 240 V AC version Protection Class 1, and Havit’s wiring order is earth first, then live and neutral. The 12 V DC version is Class 3, needs no earth, and must never be connected directly to 240 V.
Can I run several off one driver?
Yes, on the 12 V DC version, wired in parallel. Size the driver for the total load and keep every fitting within 25 m of it with voltage at the fitting inside 5% Havit treats both as warranty conditions, not as guidance.
What globe can I replace it with?
A 9 W E27 on the 240 V version or a 5 W MR16 on the 12 V, up to Havit’s 15 W maximum, LED globes only. Check the beam angle you are buying: the supplied globes are 120, and the louvres shape light the globe has already spread.
Only logged in customers who have purchased this product may leave a review.
We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.
Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.