The Mika TL is a 320mm ribbed glass and iron table lamp in satin grey one E27 globe to 25W, not supplied.

We will not quote you a weight for this lamp. Ourdatasheet records 0.14kg 140 grams for a320mm lamp made of iron and glass. That is not credible: a glass shade of thatsize weighs more than 140g on its own, and the matching Mika floor lamp is 7kg. It lookslike a decimal error for 1.4kg, but we are not going to publish a guess.If stability on a narrow surface matters to you, ask us and we will get the measuredweight from Telbix.

The ribbed detail through glass and iron

The Mika signature: the glass carries a ribbing that continues into the iron, sothe two materials share a pattern rather than meeting at a join. Lit, the ribsbreak the light into vertical lines the shade sparkles rather than glowingevenly, and against a plain wall that texture is most of what you see.

Small, and shaped for a shelf

320mm tall by 180mm wide, with a 180mm shade200mm deep on a 130mm base. That is agenuinely compact lamp it suits abedside table, a bookshelf or a hall console where a 500mm lamp woulddominate. The cable is 1,800mm.

You almost certainly do not need an electrician. It isClassII double insulated on an 1,800mmcable. The old page carried an electrician requirement that belongs to hard-wiredfittings.

The globe is visible choose it deliberately

One E27 to 25W, not supplied, and behind ribbed glass itshows. A decorative filament globe completes the lamp; a plainfrosted one will look unfinished. Dimming is globe dependent a dimmable E27with a plug-in or inline dimmer will dim it. Our record carries no value at all against dimmable.

One of a family of five

Mika runs as this table lamp, a floor lamp and three pendant sizes, all in thesame ribbed glass and satin grey. Because the pattern is the recognisable part, pieces at differentheights read as one family rather than three separate purchases.

Where it works

• Bedsides, bookshelves and hall consoles 320mm is compact.
• Alongside other Mika pieces, matched by the ribbing.
• Buy a decorative globe the ribbed glass shows it.
• Ask us for the weight if stability on a narrow surface matters.
• Indoor and dry locations only IP20.

Specifying it

320mm tall by 180mm wide, shade180mm by 200mm, base 130mm, cable1,800mm, in satin iron and ribbed glass, grey.Weight is recorded as 0.14kg, which is not credible ask us. OneE27 globe to 25W, not supplied;dimming is globe dependent. 240V,ClassII double insulated, no earth required,IP20 indoor and dry locations only. Warranty is three years, as a replacementwarranty.

Supplied and supported by Lights For You.

Questions

How heavy is it?

We will not quote you a figure. Our datasheet says 0.14kg 140 grams for a 320mm lamp made of iron and glass, which is not credible: a glass shade that size weighs more on its own. It looks like a decimal error for 1.4kg, but we will not publish a guess. Ask us and we will get the measured weight.

Do I need an electrician?

It is double insulated with an 1,800mm cable, so almost certainly not. The old page carried an electrician requirement that belongs to hard-wired fittings.

What is the ribbed detail?

The glass carries a ribbing that continues into the iron, so the two materials share a pattern rather than meeting at a join. Lit, the ribs break the light into vertical lines, so the shade sparkles rather than glowing evenly.

Will it fit a small bedside table?

Yes 320mm tall on a 130mm base is genuinely compact, and it suits a bedside, a bookshelf or a hall console where a 500mm lamp would dominate.

Will I see the globe?

Yes behind ribbed glass it shows. A decorative filament globe completes the lamp; a plain frosted one will look unfinished.

Can I dim it?

It depends on the globe. A dimmable E27 with a plug-in or inline dimmer will dim; a plain globe will not. Our record carries no value at all against dimmable.

Can I match it with other Mika pieces?

Yes the range runs as this table lamp, a floor lamp and three pendant sizes, all in the same ribbed glass and satin grey.