Welcome To our shop !

Mini 316 Stainless Steel TRI Colour LED

$67.995 $135.99
SKU: KO80391101494
Availability: in Stock

Same 190 mm bollard as the black Mini, with the stainless steel left bare and thatchanges what you sign up for. A natural 316 finish looks right against sandstone, renderedwalls…

Qty:

Same 190 mm bollard as the black Mini, with the stainless steel left bare and thatchanges what you sign up for. A natural 316 finish looks right against sandstone, renderedwalls and coastal-style planting in a way powder coat does not, and it ages rather than chips. Thetrade is a maintenance routine, and Havit is unusually direct about it, so it is worth reading beforeyou choose the finish rather than after.

What Havit actually asks of a bare 316 fitting

Havit’s own product page for this part number asks you tomaintain it every six months, or more frequently in coastal environments, to preserveboth the appearance and the warranty, and recommends its HV9971 maintenance kit. Theinstallation sheet puts the consequence in writing: all 316 stainless fittings require regular cleaningmaintenance to avoid tea staining, and tea staining is not covered by the warranty.Tea staining is the light brown surface discolouration stainless develops when salts and grime are leftsitting on it; it is cosmetic rather than structural, and it is entirely preventable with a wash.

Two supplies, and only one of them needs a driver

The listing carries a 240 V AC part number and a 12 V DC one. Themains version takes a 9 W E27 tri-colour globe for 700 lm at 3000K, 720 lm at4000K and 740 lm at 5500K and wires to the circuit with an earth. The low-voltage version takesa 5 W MR16 globe for 270 lm, 285 lm and 300 lm and must be run from asuitable 12 V DC LED driver never connected directly to 240 V. Havit caps that run at25 m from the driver with the supply within 5%, and treats it as a warranty conditionrather than a recommendation.

The practical detail
  • IP54 splash protection, not immersion. The base plate must be fixed to concrete,the fitting must not sit below ground level, and every hole including the cable entry must be siliconedor the warranty is void.
  • Tri-colour is a switch on the globe, factory-set to 3000K. On this model the coveris held by two nuts and washers; take those off, then the globe, and move the switch.
  • IK08 impact rating, CRI >80, a 120 suppliedglobe, and parallel wiring so one failure does not take the run with it. Not dimmable.
  • 3 Years Replacement warranty, with the optional HV1607 spike ifyou would rather not pour a footing.

Ask Lights For You for the maintenance kit at the same time as the fittings it is the cheapestwarranty insurance on the whole order.

Questions

What is tea staining and should I worry about it?

It is the light brown surface discolouration that stainless steel develops when salt and grime are left to sit on it. It is cosmetic rather than structural and washes off, but Havit specifically excludes it from the warranty, which is why the maintenance routine matters more on this finish than on the powder-coated black one.

How often does it need cleaning?

Havit asks for maintenance every six months, and more frequently in coastal environments, to preserve appearance and warranty. It recommends its own HV9971 maintenance kit for the job. On an inland site twice a year is genuinely enough; closer to salt you should expect to do it more often.

Should I choose this or the powder-coated black version?

They are the same fitting and the same 316 stainless body the black one simply has a poly powder coating over it. Bare stainless suits sandstone, render and lighter hard landscaping and ages gracefully; black disappears into planting and hides marks better. The maintenance clause applies to both, but it is far more visible on the bare finish.

What is the difference between the two part numbers?

Supply voltage. The 240 V AC model takes a 9 W E27 globe and wires straight to the circuit with an earth; the 12 V DC model takes a 5 W MR16 globe and needs a 12 V DC LED driver. The mains version is roughly two and a half times brighter, so pick on the installation you have rather than on price.

How far can the 12 V model sit from its driver?

Up to 25 metres, with the voltage at the fitting within 5% of what it needs. Havit states that going beyond that allowance voids the warranty, so on a long run the driver position has to be planned before the cable is laid.

Is IP54 enough for an exposed position?

It covers splashing water from any direction, which is rain, sprinklers and a passing hose. It does not cover jets or standing water, so the fitting must be on its base plate above ground level with the cable entry siliconed. Somewhere that puddles after heavy rain is the wrong spot for it.

Can the colour temperature be changed after installation?

Yes. The selection is a physical switch on the side of the globe rather than a wired choice, so you take the cover off, remove the globe, move the switch and put it back. It arrives on 3000K.

Only logged in customers who have purchased this product may leave a review.

Shipping policy for our store

We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.

  • Fast shipping within 1-3 business days
  • Free shipping on orders over $40
  • 30 days money back guarantee
  • 24/7 online customer support
  • Secure packaging & safe delivery

Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.