Your shopping cart is empty!
The Noray 970 is the 970 mm version of the same bollard poly powder coated blackaluminium, frosted Perspex lens, built-in 12 W LED, sold in a240 V AC and a 24 V DC version chosen by part number.
This model and the 570 mm Noray are identical on every specification except height:the same 12 W built-in LED, the same 285 lm / 330 lm / 305 lm, the same120 beam, the same IP and impact ratings. So the taller post isnot brighter it lights a wider circle more softly, because the sameoutput is thrown from roughly 970 mm instead of 570 mm. Choose it where you want fewerbollards covering more path, or where planting would swallow a lower fitting; choose the shorter one whereyou want light held closer to the ground and less of it in eye line.
HV1639T-BLK-240V is 240 V AC mains,Protection Class 1, and requires an earth earth first, then live andneutral, into the IP-rated junction box inside the body. HV1639T-BLK-24V is24 V DC, Class 3, needs no earth, andmust be used with a suitable 24 V DC LED driver. It is 24 V, not 12 V a 12 V driver is the wrong supply. On the low-voltage version the voltage at the fitting must staywithin 5% of the rated figure or the warranty is void, which on a 970 mm bollard at thefar end of a run is a cable-sizing question rather than a formality. Multiple fittings on one supply arewired in parallel.
The LED is built in no lamp base, no globe, nothing to replace and Havit rateslamp expectancy at >30,000hrs. It is not dimmable. Colour temperatureis set on a switch under the top, which lifts off after loosening the allen screws on the side; it shipsat 3000K, and 4000K is the brightest of the three settings at 330 lm,not the coolest. Colour quality is CRI >80 with SDCM <5, and glareis UGR <12. The body is IP65 and IK10 the impactrating is the reason to specify this in a car park, a school or a public walkway.
It is surface mounted: the base plate fixes to concrete or a concretepad, and the fitting must not be installed below finished ground level. Everyhole including the cable entry must be siliconed, silicone must be run around the fitting at ground level,and all o-rings and seals must be in place Havit voids the warranty otherwise. HV1607is the optional spike for pushing into soil instead, and HV162X-CI is Havit’s anchor-boltset for bolting the plate down. And the siting limit applies to this model too: Havit states thataluminium and 304SS fittings must not be installed within 5 km of any salt waterenvironments. Installation must be by a qualified electrician to AS/NZS 3000. Lights For Youpublishes these figures for HV1639T-BLK from its own dated HV1639T-RND OCT22 data sheet,the shared HV1638T/HV1639T JAN23 installation instructions and Havit’s page for thismodel, which states 3 Years Replacement Warranty (items ordered after 01/01/22).
Is the 970 mm version brighter than the 570 mm one?
No. They are identical on output the same 12 W built-in LED and the same 285 lm / 330 lm / 305 lm. The taller post spreads the same light over a wider circle, so it reads as softer and covers more path. Height changes coverage, not brightness.
Is this 12 V or 24 V?
The low-voltage version is 24 V DC. HV1639T-BLK-24V must be used with a suitable 24 V DC LED driver, and a 12 V driver is the wrong supply for it. The 240 V AC version needs no driver at all.
Can the LED be replaced?
No it is built in, with no lamp base and no globe. Havit rates it at >30,000hrs lamp expectancy. It is the trade for a sealed IP65 body and it is worth knowing up front.
Which colour temperature gives the most light?
4000K, at 330 lm. 3000K gives 285 lm and 5500K gives 305 lm, so output peaks in the middle rather than at the cool end. Do not assume the coolest setting is the strongest.
Can it be dimmed?
No. Every source naming this model states Dimmable: No, and with a built-in LED there is no globe to swap for a dimmable one.
What is involved in fixing it down?
It is surface mounted onto concrete or a concrete pad never below finished ground level. Every hole including the cable entry is siliconed and silicone is run around the fitting at ground level; all o-rings and seals must be in place. Havit sells HV162X-CI anchor bolts to suit its bollards, and HV1607 is an optional spike if you would rather put it into soil.
Can I use it near the sea?
Havit’s instruction sheet rules it out: aluminium and 304SS fittings must not be installed within 5 km of any salt water environments. This bollard is aluminium, so the clause applies. It is a warranty condition, and inside that distance you should be looking at a 316 stainless fitting.
Only logged in customers who have purchased this product may leave a review.
We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.
Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.