Welcome To our shop !

Outdoor 316 Stainless Steel TRI Colour

$94.995 $189.99
SKU: KO80391101323
Availability: in Stock

Onder 316 stainless steel tri-colour LED pond lightThe Onder is a submersible pond and water-feature light in 316 stainless steel, rated IP68 the rating that means continuous immersion rather than…

Qty:
Onder 316 stainless steel tri-colour LED pond light

The Onder is a submersible pond and water-feature light in 316 stainless steel, rated IP68 the rating that means continuous immersion rather than mere weather resistance. It is designed to sit in the water and light a feature from below: a spill wall, a fountain, planting at the edge of a pond, or the underside of moving water, where the light source is meant to be invisible and only its effect seen.

The 316 grade of stainless matters more here than it would on a wall fitting. Pond water is not clean water it carries dissolved minerals, organic acids and whatever treatment chemicals the pond runs on and 316 is the grade specified for sustained contact with it.

Light output and colour temperature

The Onder is a tri-colour fitting drawing 5W, with the colour temperature selected at installation rather than fixed at manufacture: 3000K, 4000K or 5500K, rated at 270lm, 285lm and 300lm respectively. Colour rendering is 80 CRI or better and the beam is 120.

Warm 3000K is the usual choice for planting and stonework, where it keeps greens and sandstone looking natural under water. The cooler settings suit moving water and pale surfaces, where a colder light reads as cleaner and picks up movement more sharply. The fitting is not dimmable.

The globe

Unlike a sealed LED fitting, the Onder takes an MR16 LED globe, so the light source is a replaceable component rather than part of the housing. For a fitting that spends its life underwater that is a genuine advantage: the expensive part is the stainless body and its seal, and the part most likely to need attention can be changed without replacing it.

Power and installation

The Onder runs on 12V DC, so it needs a 12V driver on the circuit rather than a mains connection at the fitting. That is what makes a submersible light safe to specify: the wiring in and around the water is low voltage. Installation is still work for a licensed electrician, who will confirm the driver’s capacity covers every fitting on the run.

When positioning it, remember that water moves light. A fitting aimed straight up through a disturbed surface throws a pattern that shifts constantly; one aimed across a feature gives a steadier result. It is worth trialling the position before anything is fixed or backfilled.

Frequently asked questions

Can it be fully submerged?

Yes. It is rated IP68, which covers continuous immersion, and the body is 316 stainless steel.

What globe does it take?

An MR16 LED globe, rated 5W in this fitting.

Does it need a driver?

Yes. It runs on 12V DC and requires a 12V driver, which is not part of the fitting.

Can it be dimmed?

No. The Onder is not a dimmable fitting.

How do I choose the colour temperature?

It is selected on the fitting at installation 3000K, 4000K or 5500K so it is best decided before the fitting goes into the water.

Only logged in customers who have purchased this product may leave a review.

Shipping policy for our store

We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.

  • Fast shipping within 1-3 business days
  • Free shipping on orders over $40
  • 30 days money back guarantee
  • 24/7 online customer support
  • Secure packaging & safe delivery

Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.