Welcome To our shop !

Prime Coloured Fixed WIFI Downlight 70mm Cutout

$48 $96
SKU: KO80391096501
Availability: in Stock

This is the smallest Prime downlight with a full-colour RGBCW engine and Wi-Fi, on a 70mm cut-out, and it is the only listing carrying all six finishes of the model…

Qty:

This is the smallest Prime downlight with a full-colour RGBCW engine and Wi-Fi, on a 70mm cut-out, and it is the only listing carrying all six finishes of the model antique brass, brass, copper and nickel alongside black and white. Each is a complete 12W luminaire supplied with its driver, flex and plug.

The smallest hole in the range

70mm is the tightest cut-out Havit offers on the Prime, behind a face of 88mm and a body 70mm deep. It suits a ceiling already drilled at 70mm and a look that keeps the aperture discreet. The rest of the range steps up to 76mm and 90mm on different bodies, and none of them is interchangeable with this one the part number, not the range name, is what has to match the ceiling.

The number to read before anything else

Havit’s ordering row measures 300lm at 3000K and 320lm at 5500K on the white channel. The switched HV5511T on the identical body at the identical 12W measures 839 to 913lm. Choosing colour therefore costs roughly two thirds of the white light, which nothing in the wattage or the price suggests, and on a 70mm aperture in a large room that is the difference between a lighting layout and an accent layout. The individual colours are lower again red 15lm, green 32lm and blue 25lm because one colour uses one of three emitters. Colour on this fitting is atmosphere; the white channel does the lighting.

What the colour engine gives you

Red, green and blue mix with a white channel, all controlled from the TUYA app on a phone or tablet, so a single fitting covers ordinary white light and a set scene without a second circuit or a separate colour fixture. The diffuser is frosted perspex, which blends the three emitters into one colour rather than showing them separately, and which is why the beam opens to 120 a wash rather than an accent. Dimming happens in the app, not at the wall: there is no Triac driver here, so it must not be wired to a dimmer plate and should not share a dimmed circuit with the switched HV5511T.

Insulation and the IC-4 condition

It is IC-4 rated, and Havit sets three conditions with it: only the LED fitting may sit under insulation, the driver must never be covered and must be mounted above any insulation covering the fixture so it can ventilate, and the fixture must not be used with loose-fill insulation such as macerated paper or wool.

Body, rating and warranty

The body is aluminium the brass, copper and nickel names describe the finish on it running on 240V AC, Protection Class 2 so no earth is required at the fitting, and IP54 at the front of the fitting only, which makes it an indoor recessed downlight rather than a wet-area or exterior one. CRI>90, SDCM<4, UGR<22, IK06, lamp expectancy >50,000hrs. Havit’s warranty line for these part numbers reads “3 Years replacement warranty (items ordered after 01/01/22)”. One thing Lights For You will not tidy up: Havit’s ordering row names the cool white point 5500K while its page copy for the same part numbers calls it 6500K, and nothing in its material reconciles the two, so both are reported.

Questions

What cut-out does it need?

70mm, with a face of 88mm and a body 70mm deep. It is the smallest of the four Prime cut-outs the others are 76mm and 90mm on different bodies and will not fit a 70mm hole.

How much light does it give?

300lm at 3000K and 320lm at 5500K on the white channel, against 839913lm from the switched HV5511T on the same body and the same 12W. Plan the fitting count around 300lm rather than around the wattage.

Why are the colours dimmer than the white?

Because a single colour uses one of the three colour emitters. Havit measures red at 15lm, green at 32lm and blue at 25lm normal for a colour-mixing downlight, where the colours set the mood and the white channel lights the room.

Can I dim it from a wall dimmer?

No. It is dimmed in the TUYA app and Havit does not list it as Triac dimmable, so it should not be put on a dimmer plate or share a dimmed circuit with the switched HV5511T.

Is the cool white 5500K or 6500K?

Havit says both its ordering row for these part numbers gives 5500K with the 320lm figure, and its page copy for the same part numbers says 6500K. Nothing in Havits material reconciles them, so this page reports both.

Can insulation go over it?

It is IC-4 rated, but only the LED fitting may be covered. The driver must never be covered and must be mounted above any insulation covering the fixture, and loose-fill insulation such as macerated paper or wool must not be used with this fixture at all.

Are all six finishes on this page the same fitting?

Yes one aluminium body, one colour engine, one 70mm cut-out. Antique brass, brass, copper and nickel are finishes applied to the aluminium, and black and white are the same housing powder coated.

Only logged in customers who have purchased this product may leave a review.

Shipping policy for our store

We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.

  • Fast shipping within 1-3 business days
  • Free shipping on orders over $40
  • 30 days money back guarantee
  • 24/7 online customer support
  • Secure packaging & safe delivery

Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.