Your shopping cart is empty!
This is the tilting Prime downlight with a full-colour RGBCW engine and Wi-Fi, in four coloured metal finishes HV5512RGBCW-AB, HV5512RGBCW-BR, HV5512RGBCW-CP and HV5512RGBCW-NK. It uses the same housing and the…
This is the tilting Prime downlight with a full-colour RGBCW engine and Wi-Fi, in four coloured metal finishes HV5512RGBCW-AB, HV5512RGBCW-BR, HV5512RGBCW-CP and HV5512RGBCW-NK. It uses the same housing and the same 90mm cut-out as the other two HV5512 models and the same 20 tilt, and it is a very different light behind the face.
Havit’s ordering row for this model measures 300lm at 3000K and 320lm at 5500K on the white channel. The switched HV5512T on the identical body at the identical 12W measures 839 to 913lm. So choosing colour on this body costs roughly two thirds of the white light, and that is not something the range name, the wattage or the price suggests. In a living room it means planning more fittings, or accepting a softer general light in exchange for the colour. The individual colours are quieter again Havit measures red 15lm, green 32lm and blue 25lm which is normal for a colour-mixing downlight and is the right expectation to have: colour here is atmosphere, not illumination.
Red, green and blue mix with a white channel, all from the TUYA app on a phone or tablet, so one fitting covers everyday white light and a set scene for a film or a party without a second circuit. The diffuser is frosted perspex rather than the clear glass used on the switched and tunable-white versions, which is what mixes the colours evenly instead of showing three separate emitters, and it is why the beam opens out to 120 where the others are 60. A wider, softer beam is the right optic for a colour wash and the wrong one for accenting a picture.
The module tilts 20, which on a 120 beam shifts the emphasis of a wash rather than aiming a spot. Dimming happens in the app, not at the wall there is no Triac driver here, so it must not go on a wall dimmer and should not share a dimmed circuit with the switched HV5512T.
It is IC-4 rated with the conditions Havit sets out on the installation sheet: only the LED fitting may sit under insulation, the driver must never be covered and must be mounted above any insulation covering the fixture, and the fixture must not be used with loose-fill insulation such as macerated paper or wool.
The body is aluminium brass, copper and nickel are finishes on it 105mm across the face by 70mm deep, on 240V AC with flex and plug supplied. Protection Class 2, so no earth is required at the fitting, and IP54 at the front of the fitting only. CRI>90, SDCM<4, UGR<22, IK06, lamp expectancy >50,000hrs. Havit’s warranty line for these part numbers reads “3 Years replacement warranty (items ordered after 01/01/22)”. One thing Lights For You will not tidy up: Havit’s ordering row names the cool white point 5500K while its page copy for the same part numbers calls it 6500K, and the two are not reconciled anywhere in its material, so both are reported rather than one being chosen.
How much light does it actually give?
300lm at 3000K and 320lm at 5500K on the white channel. For comparison, the switched HV5512T on the same body and the same 12W gives 839913lm, so this is roughly a third of the white output. Plan the number of fittings around 300lm, not around the wattage.
Why are the colours so much dimmer than the white?
Because a single colour uses only one of the three colour emitters. Havit measures red at 15lm, green at 32lm and blue at 25lm. That is normal for a colour-mixing downlight the colour channels are for atmosphere and the white channel does the lighting.
What cut-out does it need?
90mm, with a body of 105mm across the face by 70mm deep the same hole as the switched and tunable-white versions of this body, and the same as the fixed deep HV5514.
Why is the beam 120 when the other HV5512 models are 60?
Different diffuser. This model uses frosted perspex to mix the three colours evenly, where the switched and tunable-white versions use clear glass. The frosting is what opens the beam out, which suits a colour wash and does not suit accenting.
Can I dim it from a wall dimmer?
No. It is dimmed in the TUYA app and Havit does not list it as Triac dimmable, so it should not be wired to a dimmer plate or share a dimmed circuit with the switched HV5512T.
Is the cool white 5500K or 6500K?
Havit says both. Its ordering row for these part numbers gives 5500K with the 320lm figure, and its page copy for the same part numbers says 6500K. Nothing in Havits material reconciles the two, so this page reports both rather than picking one.
Can insulation go over it?
It is IC-4 rated, but only the LED fitting may be covered. The driver must never be covered and must be mounted above any insulation covering the fixture, and loose-fill insulation such as macerated paper or wool must not be used with this fixture at all.
Only logged in customers who have purchased this product may leave a review.
We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.
Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.