The Satrom TL is a 420mm LED table lamp with a marble base and asand-finished iron frame 6W giving 420lm at 3000K, withtouch dimming in black with green marble orantique brass with white marble.

Green marble, which almost nothing else here offers

This is the reason to look twice. Marble bases in this catalogue areblack or white. The Satrom offers green marble deep,veined, and genuinely uncommon in lighting. Paired with the black iron frame it reads asconsidered rather than default, and it sits withbrass, dark timber and deep colour in a way a white marble lamp cannot.

The alternative is white marble with antique brass, which is thelighter, warmer of the two and the safer choice against pale walls.

It dims by touch, from the lamp. No wall dimmer, no remote,no inline switch to find in the dark touch it and adjust. On a bedside or adesk that is the most useful dimming method there is, because the control is where your hand alreadygoes.

420 lumens and this one you can actually read by

6W at 70lm/W, which is efficient, and420lm is a genuinely usable output for a lamp this size. Compare the Mapel,also a 6W marble-based table lamp, which gives 195lm through layeredshades. The Satrom gives more than twice as much:the Mapel is a mood lamp, the Satrom is a working one, and both are worth buying fordifferent reasons.

It is ClassIII low voltage so it needs adriver, and no source we hold mentions one. The old page said an electrician was required,which is wrong for a corded lamp but do not assume it simply plugs in untilwe have checked. Ask us and we will confirm what ships in the box.

Compact, and weighted where it matters

420mm tall by 198mm wide on an 80mm base, witha 1,800mm cable. The base is small, but it issolid marble the weight sits right at the bottom, which is what lets a420mm lamp stand on an 80mm footprint. It suits abedside table, a sideboard or a desk where surface is short.

Where it works

• Bedsides touch dimming, and bright enough to read by.
• Desks and sideboards with little surface to spare.
• Against brass, dark timber or deep colour in green marble.
• Confirm the driver arrangement with us before ordering.
• Indoor and dry locations only IP20.

Specifying it

420mm tall by 198mm wide, base 80mm, cable1,800mm, in solid marble and sand-finished iron. Integrated6W LED giving 420lm at 3000K, included,TOUCH dimming. 240V supply,ClassIII low voltage; driver required, not confirmed as supplied,IP20 indoor and dry locations only. Warranty is three years, as a replacementwarranty.

Supplied and supported by Lights For You.

Questions

Is the marble real?

Yes solid marble, in green or white. Green marble is genuinely uncommon in lighting; the bases in this catalogue are otherwise black or white.

Green or white marble?

Green with the black frame reads as considered rather than default, and sits with brass, dark timber and deep colour. White with antique brass is the lighter, warmer pairing and the safer choice against pale walls.

How do I dim it?

By touching the lamp. No wall dimmer, no remote, no inline switch to find in the dark the control is where your hand already goes.

Is it bright enough to read by?

Yes 420lm from 6W, which is a genuinely usable output for a lamp this size. For comparison, the Mapel is also a 6W marble-based lamp and gives 195lm through layered shades: the Mapel is a mood lamp, the Satrom is a working one.

Does it need a driver?

It is Class III, low voltage under 54V, so yes and no source mentions one. Ask us to confirm what ships in the box.

Do I need an electrician?

The old page said so, which is wrong for a corded lamp. But do not assume it simply plugs in until we have confirmed the driver arrangement ask us.

Will it be stable on a small table?

The base is only 80mm, but it is solid marble, so the weight sits right at the bottom. That is what lets a 420mm lamp stand on that footprint.