Your shopping cart is empty!
This is the Shawl you buy when you do not want the fitting to be part of the picture.The body underneath is the same solid brass as its natural-finish sibling, but it is powder-coated black so instead of ageing into a warm brown patina, it stays the colour it arrived. Against dark mulch, oranywhere the light matters and the fixture should not, that is the more useful behaviour. It is also theversion to choose if you are matching existing black hardware.
Shawl is rated IP54: dust-protected and splash-resistant. Most spikes in this rangeare IP65, so this is a materially lower seal on something that sits at ground level. It is at home in abed watered by hand or drip, a raised planter, under eaves, or a path that drains. It isnot the fitting for a spot swept by a pop-up sprinkler, for a lawn edge that gets hoseddown, or for any hollow where water stands after rain. If that is your position, buy an IP65 spikeinstead no finish survives the wrong rating.
It takes a 5 W MR16 tri-colour globe, supplied. Because the globe is the light sourceand it unclips, the fitting has no beam angle of its own the spread is whatever globeis in it. The one that comes with it is 120, a broad wash suited to lighting a shrub, alow wall or a bed rather than a column up a trunk. If you want a defined uplight, fit a narrower MR16 andcheck the beam figure on the box. Output is 270 lm at 3000K, 285 lm at 4000K and 300 lm at 5500K, selectableat the globe before it goes in.
Solid brass under a poly powder-coated black finish, on a plastic spike. Because the black is acoating rather than the metal itself, treat it as painted garden hardware an edger or mower strikegoes through it, and there is brass underneath rather than more black. Backed by a3-year replacement warranty. The wiring is licensed electrician’s work.
Choosing between this and the natural brass version? Lights For You can tell you which way the finishgoes in your conditions coastal, irrigated and sheltered age a fitting differently, and the black oneis the answer whenever “unchanged” is the requirement.
What does IP54 rule out?
Direct and sustained water. IP54 covers dust and splashes, so rain and incidental spray are fine, but a sprinkler aimed at it, a hose-down, or a low point where water pools after rain are not. Nearly every other spike light in this range is IP65 if the position is genuinely wet, that is the specification to buy.
Will the black finish change colour outdoors?
No, and that is the reason to choose it over the natural brass version. The brass one is meant to tarnish to a warm brown; this one is powder-coated, so it stays the colour it arrived. The trade is that a coating can be chipped, and a deep scratch exposes the brass beneath rather than more black.
What beam angle does it give?
Whichever globe you fit. It takes a replaceable MR16, so the housing has no beam of its own. The tri-colour MR16 supplied with it is 120 a wide wash. For a defined uplight on a trunk or a column, fit a narrower MR16 and check the beam figure before you buy it.
Can I mount it on a wall or a deck instead?
Yes. Havit lists the installation type as ground-spike or surface mounted, and a matching black surface-mount base is sold separately for exactly that. Keep the IP54 rating in mind wherever it ends up a position under eaves treats it better than a fully exposed one.
Does it need a driver?
Yes, a suitable 12 V DC LED driver, and it must not be connected directly to 240 V. Two conditions travel with it as warranty terms: no more than 25 m between fitting and driver, and the supply held within 5% of 12 V. Both belong in the plan before any cable is buried.
How is it different from the brass Shawl?
The finish, and one specification. Same solid brass body, same 5 W MR16 globe, same 270300 lm, same IP54, same 225 mm spike and 90 tilt but the natural brass version is left to develop a patina, and its own newer datasheet records it as Triac dimmable, where this one is not dimmable with the globes supplied. Choose on appearance first and check the dimming line second.
Which colour temperature should I use?
3000K suits planting and warm-toned materials and is the usual choice; 4000K reads neutral against render and painted walls; 5500K is deliberately cool. All three are set at the globe, so decide on site with the light on.
Only logged in customers who have purchased this product may leave a review.
We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.
Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.