The Shyn WB is a 300mm bedside wall light with a built-in shelf and a USB-A chargingport one E27 globe to 25W, not supplied inbeige, black, grey or white.

It has a shelf and a USB port, and our record mentionedneither. Those are the two reasons to choose this fitting over any other bedside wall light:your phone charges from the light and sits on the light, so the bedside table needsno socket, no adaptor, no cable and no surface. Both appeared once in the old description, which wasthen cut off mid-word.

Why a shelf on a wall light is the point

A bedside wall light already saves the surface a table lamp would occupy. Adding ashelf gives that surface back but on the wall, above the bed,where a phone, a book or glasses sit without cluttering anything. Combined with theUSB-A port, the result is that a roomneeds no bedside table at all. That is why the range is aimed atholiday homes and hotel bedsides, and it works exactly as well in a small bedroom ora rental.

300 by 220mm, projecting 215mm

The 215mm projection is what makes the shelf possible, and it is worthplanning for: this is a fitting that stands well out from the wall. Above a bed thatis right; in a corridor it would be an obstruction. Overall300mm high by 220mm wide, with the fitting itself270mm and a 125mm shade 145mm deep, at1.79kg.

Our record carries no dimensions at all. The figures abovecome from the old specification table. If you are planning a fit against a bedhead or between twofixed points, the 215mm projection is the number to work from and askus if you need it confirmed.

Four quiet colours

Beige, black, grey or white, all satin. This is a fittingdesigned to be useful rather than noticed the finishes reflect that.White disappears above a pale bedhead; black defines it;beige and grey sit between and suit painted or panelled walls.

The globe is yours to choose

One E27 to 25W, not supplied. Beside a bed that is an argument for awarm 2700K globe rather than a bright one.Dimming is globe dependent a dimmable E27 with a wall dimmer will dim it; aplain globe will not. Our record carries no value at all against dimmable.

It is ClassI earth required and hard-wired. Alicensed electrician installs it, and on this page that requirement is genuine.

Where it works

• Bedsides the shelf and the USB port replace a bedside table.
• Holiday homes, hotels and rentals.
• Small bedrooms with no room for a table.
• It projects 215mm not for a corridor.
• Indoor and dry locations only IP20.

Specifying it

300mm overall height by 220mm wide, fitting270mm, shade 125mm by 145mm, projection215mm, 1.79kg, in satin iron.Built-in shelf and USB-A charging port. OneE27 globe to 25W, not supplied;dimming is globe dependent. 240V,ClassI earth required,IP20 indoor and dry locations only. Warranty is three years, as a replacementwarranty.

Supplied and supported by Lights For You.

Questions

Does it really have a shelf and a USB port?

Yes to both, and our record mentioned neither. Your phone charges from the light and sits on the light, so the bedside needs no socket, no adaptor, no cable and no surface. Both appeared once in the old description, which was then cut off mid-word.

Why does a wall light need a shelf?

Because a bedside wall light already saves the surface a table lamp would occupy the shelf gives that surface back, on the wall above the bed. Combined with the USB port, a room needs no bedside table at all.

How far does it stick out?

215mm, which is what makes the shelf possible. Above a bed that is right; in a corridor it would be an obstruction. Plan for it.

Is a globe included?

No. One E27 to 25W, your choice and beside a bed that is an argument for a warm 2700K globe rather than a bright one.

Can I dim it?

It depends on the globe. A dimmable E27 with a wall dimmer will dim; a plain globe will not. Our record carries no value at all against dimmable.

Which colour should I choose?

All four are satin, and the fitting is designed to be useful rather than noticed. White disappears above a pale bedhead, black defines it, beige and grey sit between and suit painted or panelled walls.

Do I need an electrician?

Yes Class I, earth required, hard-wired. On this page that requirement is genuine.