Your shopping cart is empty!
A surface-mounted ceiling light is the general light in a room – the one that has to make the whole space usable rather than pick out any part of it.
It is the fitting most often chosen last and lived with longest. Where downlights need a ceiling void and a plan, a surface fitting goes onto any ceiling and lights the room from one point, which makes it the practical answer in older houses, in concrete-ceilinged apartments and anywhere a ceiling cannot be cut into.
The thing to check is the spread rather than the output. A high-output fitting with a narrow spread leaves the edges of a room dark and the middle over-lit, which reads as gloomier than a more modest fitting spreading light evenly.
This is a tri-colour fitting: the colour temperature is selected at installation rather than fixed at manufacture. It runs at 3000K (2600lm), 4000K (2700lm), 5500K (2800lm).
That is genuinely useful rather than a specification-sheet feature. Colour temperature is the setting people most often get wrong and most regret, and it cannot be judged from a showroom – it depends on the surfaces in the room and on the light around it. A switchable fitting lets the decision be made in place, and changed if it is wrong.
Set every fitting on a run to the same value. Mixed colour temperatures in one space are obvious and look like a fault, which is the one way a tri-colour fitting can make a result worse rather than better.
This fitting is rated IP54. Check that against where it is going before ordering.
It is made from polycarbonate.
This is a 240V fitting, wired directly to mains.
Mains connection is licensed electrical work in Australia and has to be done by an electrician.
Plan the cable route before anything is fixed. It is the part of an installation that cannot be changed afterwards without undoing the rest of it, and it is the reason otherwise finished jobs get left half done.
Two checks save most of the problems that show up after an installation is finished. The first is where the fitting will actually be seen from: a light chosen for how it looks in a product photograph is being judged from a viewpoint nobody will ever stand in, and the same fitting can be discreet from the house and glaring from the street.
The second is what else is going in around it. A single fitting is rarely the whole scheme, and matching colour temperature and finish across everything in a space matters more to the result than the specification of any one item in it. Mixed colour temperatures in particular read as a fault rather than as a choice.
If you are unsure whether this suits what you are lighting, our team at Lights For You will talk it through against the actual space rather than the specification sheet.
What does tri-colour mean?
The colour temperature is selectable at installation – 3000K, 4000K, 5500K – rather than fixed. Set every fitting on a run to the same value.
How much power does it use?
30W. Add up every fitting on the run before sizing a driver or transformer.
Can it go outside?
No. At IP54 it has no weather protection and is for dry interior positions only.
Do I need an electrician?
Yes. Connecting a fitting to mains is licensed electrical work in Australia.
What warranty does it carry?
3 Years*
Only logged in customers who have purchased this product may leave a review.
We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.
Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.