Welcome To our shop !

Swap-Deep 8W LED Dimmable Downlight White / Gold / Tri-Colour – 21448

$12.792 $15.99
SKU: KO80391098164
Availability: in Stock

The Domus SWAP-DEEP in white with a gold inner is adeep anti-glare recessed downlight 8W,800900lumens, 90100mm cutout, 56mmdeep, 60 beam, IP44, IK05, dimmable. A gold inner does something the other…

Qty:

The Domus SWAP-DEEP in white with a gold inner is adeep anti-glare recessed downlight 8W,800900lumens, 90100mm cutout, 56mmdeep, 60 beam, IP44, IK05, dimmable.

A gold inner does something the other finishes do not
  • BLACK, CHROME AND GUNMETAL CHANGE HOW THE FITTING LOOKS. GOLD CHANGES HOW THE LIGHTLOOKS.
  • A GOLD REFLECTOR IS NOT COLOUR-NEUTRAL. Light bouncing off it picks up awarm cast, so the beam edges and the spill read slightly warmer than the LED’s rated colourtemperature.
  • THE EFFECT IS SUBTLE AND IT IS REAL. It is most visible at the edges ofthe pool and on a pale wall nearby, and least visible directly under the fitting where the light has nottouched the reflector.
  • WHICH MAKES 3000 K THE NATURAL PAIRING. Warm light through a warmreflector is coherent; 5700K through gold is a cool source with a warm rim, which reads asneither. If you want the cool setting, take the chrome or thegunmetal.
  • AND CONSIDER WHAT IT SITS NEXT TO. Gold is a commitment on a ceiling in away it is not on a tap ten gold-ringed downlights in a white ceiling is a decorative decision, andit wants brass or gold hardware elsewhere in the room to look intentional.
The white fascia keeps it quiet from a distance

The outer fascia is white. SO FROM ACROSS THE ROOM THE FITTING STILLDISAPPEARS INTO A WHITE CEILING the gold is visible only when you look up intoit. That is a more controlled way to use a metal finish than a gold outer fascia wouldbe: the decorative element is where you notice it and absent where you donot. It also means an imperfect layout is forgiven, which a full metal fascia wouldnot forgive a fitting 50mm out of line is invisible in white and obvious ingold.

56 mm deep, and the depth is the only real constraint
  • All three SWAP fascias share one engine, one output and one cutout, and differ only indepth: DEEP 56mm, STEP 40mm, SLEEK35mm.
  • THE DEEP RECESSES THE EMITTER FURTHEST FROM THE CEILING PLANE, which hides the source and here also hides the gold until you are close to underneath.
  • CHECK 56 mm PLUS DRIVER ROOM BEFORE ORDERING. Raked ceilings, bulkheads,shallow joists and packed insulation are where it fails, and the depth is discovered from theladder.
  • IF IT IS MARGINAL, THE STEP AT 40 mm gives up little glare control for16mm though the gold inner is a DEEP option, so check with us beforeassuming the finish carries across.
90100 mm, and the field no record here carries

The cutout is a range, 90100mm, from thedatasheet. THAT RANGE IS THE POINT OF A SWAP: it drops into an existinghole anywhere in it, so a failed downlight is replaced without re-cutting, patching orrepainting. 43 products here publish a cutout range. AND 0 OF 843 RECORDS PUBLISH A CUTOUT AT ALL, against 87datasheets that do. On a recessed fitting it is the only dimension that cannot becorrected once cut, so measure the existing hole before ordering over 100mm this will notcover.

60, IP44, IK05

The 60 beam is part of the anti-glare design and it implies a tightergrid about the ceiling height apart on a 2.4m ceiling rather than 1.5it. Spaced like a 120 fitting it leaves scallops of darkness between thepools. IP44 is a bathroom outside the direct wet zones, not a showerenclosure. IK05 is an impact rating, published by only 23 productshere. Dimmable with suitable dimmers; a mismatched dimmer gives flicker and buzzrather than a clean failure. 35,000hrs is over thirty years at three hours aday.

What is published
Specification Value
Gold inner Changes how the LIGHT looks, not just the fitting
Because a gold reflector Is not colour-neutral the spill reads warmer
So pair it with 3000K 5700K through gold reads as neither
White outer fascia Still disappears from across the room
Which is more controlled than A gold outer decorative where you look, absent where you do not
It is a decorative commitment It wants brass or gold hardware elsewhere in the room
Depth 56mm + driver rakes, bulkheads, shallow joists
Cutout 90100mm 0 of 843 records publish one
Beam / spacing 60 ~ceiling height apart
IP / IK / life IP44 not a shower zone IK05 35,000hrs
Where it works
  • Rooms with brass or gold hardware it looks intentional.
  • At 3000K warm light through a warm reflector.
  • White ceilings the outer fascia still disappears.
  • Not at 5700K take the chrome or gunmetal.
  • Not in a shallow void 56mm plus driver.
Specifying it

Recessed LED downlight, deep anti-glare fascia. 8W at 240V AC.800/900/850lm at 3000/4000/5700K switchable. CRI 80, 60 beam. Cutout 90100mm, fittingdepth 56mm. IP44, IK05. Clear lens, dimmable driver with flex and plug. 35,000hrs. White fascia,gold inner. Five-year residential warranty per the sheet. BLACK, CHROME AND GUNMETAL CHANGE HOW THE FITTING LOOKS. GOLD CHANGES HOW THE LIGHT LOOKS. Agold reflector is not colour-neutral, so light bouncing off it picks up a warm cast and the beam edges andspill read slightly warmer than the LED’s rated colour temperature subtle, real, most visible at theedges of the pool and on a pale wall nearby. WHICH MAKES 3000 K THE NATURAL PAIRING: warm light througha warm reflector is coherent, where 5700 K through gold is a cool source with a warm rim and reads asneither. THE WHITE OUTER FASCIA KEEPS IT QUIET FROM A DISTANCE the gold is visible only when you lookup into it.

Supplied and supported by Lights For You.

Questions

Does the gold inner change anything beyond looks?

It is the one finish in this range that does. Black, chrome and gunmetal change how the fitting looks; gold changes how the light looks. A gold reflector is not colour-neutral, so light bouncing off it picks up a warm cast and the beam edges and spill read slightly warmer than the LED’s rated colour temperature.

How noticeable is that?

Subtle but real. It is most visible at the edges of the pool and on a pale wall nearby, and least visible directly under the fitting, where the light has not touched the reflector.

Which colour setting should I use with it?

3000K. Warm light through a warm reflector is coherent, where 5700K through gold is a cool source with a warm rim and reads as neither. If you want the cool setting, take the chrome or the gunmetal instead.

Will the ceiling look gold?

Not from across the room. The outer fascia is white, so the fitting still disappears into a white ceiling and the gold is visible only when you look up into it. That is a more controlled way to use a metal finish than a gold outer fascia would be decorative where you notice it, absent where you do not. It also means an imperfect layout is forgiven, which a full metal fascia would not forgive.

Is it a big commitment?

Gold is a commitment on a ceiling in a way it is not on a tap. Ten gold-ringed downlights in a white ceiling is a decorative decision, and it wants brass or gold hardware elsewhere in the room to look intentional rather than accidental.

Will 56mm fit my ceiling?

That is the only real constraint, since all three SWAP fascias share one engine, output and cutout. You need 56mm plus room alongside for the driver. Raked ceilings, bulkheads, shallow joists and packed insulation are where it fails, and the depth is usually discovered from the ladder. If it is marginal, the STEP at 40mm gives up little glare control for 16mm though the gold inner is a DEEP option, so check with us before assuming the finish carries across.

What size hole does it need?

90 to 100mm, from the datasheet a range, which is the point of a SWAP: it drops into an existing hole anywhere in it, so a failed downlight is replaced without re-cutting, patching or repainting. No product record in this catalogue publishes a cutout: 0 of 843, against 87 datasheets that do. Measure the existing hole, because over 100mm this will not cover.

Only logged in customers who have purchased this product may leave a review.

Shipping policy for our store

We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.

  • Fast shipping within 1-3 business days
  • Free shipping on orders over $40
  • 30 days money back guarantee
  • 24/7 online customer support
  • Secure packaging & safe delivery

Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.