Your shopping cart is empty!
The Domus SWAP-DEEP in white with a gunmetal inner is adeep anti-glare recessed downlight 8W,800900lumens, 90100mm cutout, 56mmdeep, 60 beam, IP44, IK05, dimmable. Gunmetal sits between black and chrome, and…
The Domus SWAP-DEEP in white with a gunmetal inner is adeep anti-glare recessed downlight 8W,800900lumens, 90100mm cutout, 56mmdeep, 60 beam, IP44, IK05, dimmable.
The outer fascia is white, so from across the room the fitting disappears into a whiteceiling. THAT IS THE COMBINATION MOST RESIDENTIAL SCHEMES WANT: quiet from adistance, controlled when you look up. It also forgives an imperfect layout afitting 50mm out of line is invisible in a white fascia and obvious in a blackone. Combined with the DEEP profile, the dark inner is shielded until you are close tounderneath, so the visual result from normal viewing positions is a clean ceiling with no bright rings andno dark spots.
The 60 beam is narrower than a general downlight’s 90120, which is theanti-glare design working but it means a tighter grid, about the ceiling height apart on a2.4m ceiling. IP44 is a bathroom outside the direct wet zones, not a shower enclosure. IK05 is an impact rating; only 23 productshere publish one. The colour switches between 3000K (800lm),4000K (900lm) and 5700K (850lm) note 4000K is thebrightest, not the coolest. Set every fitting in a room the same way atinstallation.
| Specification | Value |
|---|---|
| Gunmetal inner | Between black and chrome |
| Keeps more output than black | And controls glare better than chrome |
| Reads as neutral | Unlike gold it does not tint the spill |
| And unlike polished chrome | It does not show as a bright point when OFF |
| What it is not | Invisible a white inner reads as a plain hole of light |
| White outer fascia | Quiet from a distance, controlled looking up |
| Depth | 56mm + driver rakes, bulkheads, shallow joists, batts |
| Cutout | 90100mm 0 of 843 records publish one |
| Beam / brightest CCT | 60, tighter grid 4000K is brightest at 900lm |
| IP / IK / life | IP44 not a shower zone IK05 35,000hrs |
Recessed LED downlight, deep anti-glare fascia. 8W at 240V AC.800/900/850lm at 3000/4000/5700K switchable. CRI 80, 60 beam. Cutout 90100mm, fittingdepth 56mm. IP44, IK05. Clear lens, dimmable driver with flex and plug. 35,000hrs. White fascia,gunmetal inner. Five-year residential warranty per the sheet. GUNMETAL SITS BETWEEN BLACK AND CHROME, AND THAT IS THE POINT. It is a dark metallic, so itabsorbs more of the angled bounce than chrome and shows less of a bright ring at oblique viewing but itis not the light-swallowing matt black either, so it keeps more output. It also reads as neutral ratherthan as a colour: unlike gold it does not tint the spill, and unlike polished chrome it does not catchevery other light source in the room and show as a bright point when the fitting is off. WITH THE WHITEOUTER FASCIA THAT IS THE COMBINATION MOST RESIDENTIAL SCHEMES WANT quiet from a distance, controlled whenyou look up.
Supplied and supported by Lights For You.
How does gunmetal compare with black and chrome?
It sits between them, which is the point. Gunmetal is a dark metallic, so it absorbs more of the angled bounce than chrome and shows less of a bright ring at oblique viewing but it is not the light-swallowing matt black either, so it keeps more output. It controls glare better than chrome and keeps more output than black.
Does it affect the colour of the light?
No, and that distinguishes it from gold. Gunmetal reads as neutral and does not tint the spill, where a gold reflector picks up a warm cast that shows at the beam edges. It also does not catch every other light source in the room and show as a bright point when the fitting is off, which polished chrome does.
Will the fitting be invisible?
Not from directly below. Look up into it and you see a dark metal cone. If you want the fitting to read as a plain hole of light, a white inner is the choice. From across the room the white outer fascia does disappear into a white ceiling.
Why white outside and dark inside?
It is the combination most residential schemes want: quiet from a distance, controlled when you look up. It also forgives an imperfect layout a fitting 50mm out of line is invisible in a white fascia and obvious in a black one. Combined with the DEEP profile, the dark inner is shielded until you are close to underneath, so from normal viewing positions you get a clean ceiling with no bright rings and no dark spots.
Will 56mm fit?
That is the constraint that decides the range, since all three fascias share one engine, output and cutout. You need 56mm plus room for the driver, which sits alongside on a flex and plug and needs somewhere flat where it will not be covered by insulation. Raked ceilings, bulkheads, shallow joists and packed batts are where it fails. If it is marginal the STEP at 40mm gives up little for 16mm check with us whether the gunmetal inner is offered in that profile.
What size hole does it need?
90 to 100mm, from the datasheet a range, which is the point of a SWAP: it drops into an existing hole anywhere in it. We measured that 0 of 843 product records in this catalogue publish a cutout, against 87 datasheets that do, so on any downlight here ask rather than assume. Over 100mm this will not cover.
Which colour setting is brightest?
4000K at 900lm, against 850 at 5700K and 800 at 3000K the coolest setting is not the brightest here. Set every fitting in a room the same way at installation, because a ceiling at mixed colour temperatures is very obvious and awkward to correct afterwards.
Only logged in customers who have purchased this product may leave a review.
We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.
Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.