Your shopping cart is empty!
The Thema is a 975 mm round bollard in poly powder-coated black aluminium, with asealed 18 W built-in LED behind a UV-stabilised Perspex diffuser. It is the tallest fitting in this Havitbollard range, and Havit sells it in two genuinely different electrical forms rather than one whichchanges rather more than the wiring.
Havit splits the protection class by supply on this model, and it is worth reading before you order.HV1643T-BLK-240V runs on 240 V AC mains, is Protection Class1 and requires an earth. HV1643T-BLK-24V is ProtectionClass 3, needs no earth, and must be run from a suitable 24 V DC LEDdriver. Havit is explicit that a 24 V DC fitting must never be connected straight to mains.Choose the part number that matches the circuit you already have.
The tri-colour LED gives 3000K, 4000K and 5500K, andHavit pairs them with 760 lm, 855 lm and 835 lm. 4000K is the brightest of the three output does not climb with colour temperaturehere, so do not pick the coolest setting expecting the most light. The beam angle is120, colour rendering is CRI >80 and lamp expectancy is>30,000hrs. Colour is chosen on site: with the power isolated, the head lifts off thepost and a selector switch on the PCB sits under a circular cap on its underside.
The body is IP65 and IK08, a genuinely useful impact class forsomething standing at shin height beside a mower. It is aluminium, and Havit’s installationinstructions say aluminium fittings should not be installed within 5 km of saltwaterenvironments. That rules it out of most beachfront gardens the non-metal bollards in thissame range are the ones to look at there. Keep direct high-pressure water, from pressurewashers or irrigation heads, off it as well.
It bolts to a concrete base above ground level through a 113 mmmounting base, using all four holes and the supplied Dynabolts; the base arrives attached and an Allen keycomes with it, and Havit lists HV162X-CI anchor bolts as the compatible fixing set. Sealthe fixing holes, the cable entry and around the base with silicone Havit states thatfailing to seal it voids the warranty and if your supply cable is not circular, sealthe entry so the IP rating survives. The cable is supplied with a male and femaleconnector and an anti-water syphon already fitted, and removing eithervoids the warranty. A little sway is normal rather than faulty: Havit accepts up to15 mm of movement at the top of a bollard this tall. This is mains work and must be carried outby a licensed electrician to AS/NZS 3000, and the LED module is not serviceable, so planon replacing the fitting rather than a lamp. Lights For You has taken every figure on this page fromHavit’s own data sheet for HV1643T-BLK and from its dated June 2026 installation instructions, both ofwhich state a 3 Years Replacement warranty.
Do I need an earth?
It depends which one you buy, and that is unusual. HV1643T-BLK-240V is Protection Class 1 and requires an earth. HV1643T-BLK-24V is Protection Class 3 and needs no earth. Havit splits the row by supply on its own documents, so read the part number rather than the range.
What does the 24 V version need to run?
A suitable 24 V DC LED driver. Havit is explicit that a 24 V DC fitting must never be connected directly to a 240 V AC mains supply doing so will destroy it and void the warranty.
Which colour temperature gives the most light?
4000K, at 855 lm. The other two are 760 lm at 3000K and 835 lm at 5500K, so the coolest setting is not the brightest one. This varies model by model across the range, so check per product rather than assuming.
How do I change the colour temperature?
On site, with the power isolated. Loosen the Allen screws below the head, lift the head off the post, and turn the circular cap on its underside anti-clockwise the selector switch sits on the PCB behind it. Refit the cap firmly afterwards, because it is part of the weather seal.
Can I use it near the beach?
Havit says aluminium fittings should not be installed within 5 km of saltwater environments, and this one is aluminium. For a coastal site, look at the non-metal bollards in the same range instead.
The top of the bollard moves slightly. Is that a fault?
Not necessarily. Havit accepts up to 15 mm of movement at the top of a bollard of this height as normal. Beyond that, have the installer check that all four mounting holes were used, that the fixings suit the surface, and that the Allen screws joining post to base are evenly tightened.
Can I remove the connector or the syphon on the cable?
No. The cable ships with a male and female connector and an anti-water syphon fitted, and Havit states that removing either voids the warranty. The connector is there so the fitting can be swapped later without redoing the main connection.
Only logged in customers who have purchased this product may leave a review.
We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.
Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.