Welcome To our shop !

Tivah 316 Stainless Steel TRI Colour Double

$123.495 $246.99
SKU: KO80391101484
Availability: in Stock

316 stainless is the finish to specify near the coast, and it is the only one in this familythat arrives with a maintenance schedule. Havit states both things directly: all…

Qty:

316 stainless is the finish to specify near the coast, and it is the only one in this familythat arrives with a maintenance schedule. Havit states both things directly: all 316 stainlessfittings require regular cleaning to prevent tea staining, the recommended interval is six months andshorter in coastal air, and the warranty does not cover tea staining. On a twin-headfitting there is more surface and more shadowed detail around the two heads, which is precisely wherethe film forms so the routine matters more here than on the single.

What you are actually preventing

Tea staining is a shallow tan discolouration that appears where airborne salts settle on stainless andare never rinsed off. It is not rust and it does not weaken anything; the steel underneath is unaffected,and the right cleaning product removes it. Rain does not do the job, because the faces that never getrained on are exactly the ones that stain. Havit publishes a maintenance routine and sells a kit for it.Inland, none of this is likely to trouble you but the fitting is still specified with the routineattached.

Two heads, one stem, and the load that comes with them

Each head tilts through 90 and swivels through 270 independently,so one fitting lights two directions from a single hole and a single cable. The1000 mm stem, 23 mm across, stands them near knee height once set abollard by behaviour, a spike by installation. Each head carries its own 5 W MR16, sothe fitting draws 10 W: six on a run is 60 W, and a driver sized on 5 W will be short.Output is 2 x 270 lm at 3000K, 2 x 285 lm at 4000K and 2 x 300 lm at 5500K 540, 570 or600 lm across the fitting with the heads wired in parallel so one globe failing leaves the other lit.

Colour, supply and the conditions on cover
  • Both globes are tri-colour, each set at the globe: cover off anti-clockwise, glassout, switch on the side. Preset to 3000K.
  • The beam belongs to the globes, not the housing the supplied MR16s are 120floods, and narrower MR16s make it a pair of spots.
  • 12 V DC from a suitable 12 V DC LED driver. Do not connect the fitting directly to240 V.
  • 25 m maximum from the driver and supply within 5% of 12 V, bothstated as warranty conditions.
  • Not dimmable. 2 m of reinforced cable, joints soldered and sealed.Never force a head past its stop the internal cable twists and shorts, which is excluded.

IP65, IK08, protection class 3, CRI above 80, and a 3-year replacement warranty.

Not sure whether your site actually needs 316? Tell Lights For You where it is going if you are wellinland, the brass or copper twin in this same body will cost you less and ask nothing of you afterwards.

Questions

What is tea staining and why is it excluded?

It is a shallow tan film that forms on stainless steel exposed to salty or polluted air, and it is cosmetic rather than structural the steel beneath is unaffected. Havit excludes it from warranty because it is prevented by cleaning rather than caused by a defect, which is why the six-monthly routine is specified.

How often does it need cleaning?

Every six months as a baseline, and more frequently in coastal air. Havit publishes the routine and a dedicated maintenance kit. Pay particular attention to the shadowed detail around the two heads those faces never get rinsed by rain, so they are where staining starts.

How much power does it draw?

10 W. Each head takes its own 5 W MR16, and the specification records the lamp wattage for this model as 2 x 5 W. Size drivers on 10 W per fitting; a run of six is 60 W.

What is the light output?

Per head, 270 lm at 3000K, 285 lm at 4000K and 300 lm at 5500K, so 540, 570 or 600 lm across both heads. It is printed as 2 x 270 lm and so on because the heads are normally aimed at different surfaces.

Can the heads be aimed independently?

Yes, each with its own 90 tilt and 270 swivel. Stop at the mechanical limit forcing a head further tangles the internal cable and shorts the fitting, and that damage is excluded from warranty.

Is it dimmable?

No. The sheets covering this fitting record it as not dimmable, so it should not go on a dimmed circuit.

Do I really need 316 stainless?

Near salt water, yes it is the most corrosion-resistant finish in this range and it holds its colour rather than ageing. Well inland it is usually unnecessary, and the brass and copper versions of the same twin-head body need no scheduled maintenance at all.

Only logged in customers who have purchased this product may leave a review.

Shipping policy for our store

We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.

  • Fast shipping within 1-3 business days
  • Free shipping on orders over $40
  • 30 days money back guarantee
  • 24/7 online customer support
  • Secure packaging & safe delivery

Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.