Your shopping cart is empty!
Antique brass is a coating over solid brass, and the honest thing to say about it is whatHavit says: outdoors it can tarnish through. The base metal here is the same solid brass usedacross this Tivah family. The difference is a darkened finish applied on top, so the fitting arrivesalready looking weathered instead of arriving bright and getting there over a year or two. Havit’s ownnote on this range is blunt solid brass fittings with additional coatings may tarnish through thecoating when installed outdoors. That is not a reason to avoid it. It is a reason to choose it becauseyou like the starting colour, not because you expect it to be permanent.
The spike is 1000 mm long and 23 mm across. Set into a bed it holdsthe head at roughly knee height rather than down among the mulch, which is what makes it a path anddriveway-edge fitting rather than an uplight. Bury or sleeve as much of the stem as you need to set theheight, and decide that before the cable is run: the lead exits the bottom of the column, so raising thefitting later means lifting the whole thing.
A 5 W MR16 tri-colour globe is supplied, in a socket whose ceiling is20 W. You set the colour at the fitting rather than choosing it at purchase twist offthe cover anti-clockwise, lift the glass, and move the switch on the side of the globe. It leaves thefactory on 3000K. Output is 270 lm at 3000K, 285 lm at 4000K and 300 lm at 5500K. On adark antique finish the warmer settings read far better; 5500K against darkened brass tends to lookclinical. Because the globe is replaceable, the beam belongs to the globe, not the housing the supplied tri-colour MR16 is a 120 flood, and a narrower MR16 turns the same fitting into a spot.
IP65, CRI above 80, and a 3-year replacement warranty.
If you are torn between this and the natural brass version, talk to Lights For You first the twolook almost identical in a photograph and behave completely differently after two summers outside.
This fitting runs on 12 V DC and is Protection Class 3 no earth is required at the fitting. The isolation comes from the LED driver rather than from an earth conductor, and the fitting must never be connected directly to 240 V.
Is this solid brass or plated?
Solid brass, with an antique finish applied over it. The body metal is the same as the natural brass version of this fitting; only the surface treatment differs, which is what gives it the darkened look straight out of the box.
Will the antique finish last outdoors?
Havit’s own note on this range says a coated solid brass fitting may tarnish through its coating outdoors, so treat the colour as a starting point rather than a permanent state. It will still be solid brass underneath, which is why the change reads as ageing rather than as damage.
How high does the head sit?
That is up to you. The stem is 1000 mm long and you bury or sleeve as much of it as you like, so the head typically ends up somewhere around knee height for path work. Set the height before the cable run is finished, because the lead exits the base of the column.
What beam angle does it give?
The globe’s, not the housing’s. It takes a replaceable MR16, and the tri-colour globe supplied with it is a 120 flood the right shape for lighting a path or a bed. Fit a narrower MR16 and the same body becomes a spotlight.
How do I set the colour temperature?
On the globe itself. Twist the cover anti-clockwise, set the glass aside, lift the globe out and move the small switch on its side between 3000K, 4000K and 5500K. It ships preset to 3000K. Refit the glass and cover properly afterwards the seals are what hold IP65.
Can it be dimmed?
No. The sheet covering this part number records it as not dimmable, so it should not be specified into a dimmed circuit.
What driver does it need, and how close?
A suitable 12 V DC LED driver, sited within 25 m of the fitting, holding the supply within 5% of 12 V. Those two figures are warranty conditions rather than recommendations. Do not connect the fitting directly to 240 V under any circumstances.
Only logged in customers who have purchased this product may leave a review.
We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.
Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.