The Trener is a black aluminium fitting with a clear plastic diffuser and an E27 socket, designed for surface mounting at ground level a bollard-style light for the base of a wall, a garden bed edge or a path margin rather than a fitting mounted at head height. Because it takes a standard E27 globe, the light source is a commodity you can replace yourself, and a warm 2700K LED globe of around 9W and 700lm gives the soft glow the diffuser is designed for. It is rated IP44, which sets the boundary on where it can go.

The choice to make

There is one part number, HV3673W-BLK, so the decision is about position and globe. IP44 means protection against splashing water from any direction adequate for a garden bed or a path edge that gets rain and irrigation, but not for a position that is hosed down, flooded or submerged. Do not install it where water pools. The globe you fit determines the colour and character of the light, and it should be a dimmable type if you intend to dim.

Where it works

• Garden bed edges along a front path, spaced to mark the route.
• The base of a rendered or brick wall, uplighting the surface at ground level.
• Courtyard and alfresco perimeters where a low glow is wanted rather than area light.
• Driveway margins and entry landscaping, set back from where a car wheel could reach.

Specifying it

The Trener is 240V and wires straight to mains there is no driver or transformer. It is a Class1 fitting at 240V and requires an earth, which matters at ground level where the fitting is accessible. The globe is an E27 large screw base and it is replaceable; a B22 bayonet, E14 or GU10 globe will not fit. The maximum the socket accepts is 9W a low ceiling because the clear plastic diffuser encloses the lamp, so heat has nowhere to go. It is Triac dimmable when fitted with a dimmable globe and paired with a Triac-compatible dimmer. Impact rating is IK07 and rated life over 30,000hours.

Supplied by Lights For You the Trener’s 9W E27 ceiling is unusually low for a screw-base fitting, so order the globe with it and check the wattage on the box rather than reaching for a spare from the cupboard.

Questions

Where can the Trener be installed?

It is rated IP44, so it handles splashing water from rain and irrigation. It is not suitable for positions that are hosed down, flooded or where water pools.

Which globe does it take?

An E27 large screw base, and it is replaceable. A B22 bayonet, E14 or GU10 globe will not fit this socket.

What is the maximum globe wattage?

9W. That is the ceiling and it is low for a reason the clear diffuser encloses the lamp. Exceeding it is a fire risk and voids the warranty.

Does it need a driver?

No. It is 240V and wires straight to mains. It is Class1 and requires an earth.

Can it be dimmed?

Yes it is Triac dimmable. You need a dimmable E27 globe and a Triac-compatible dimmer.

Is it a wall light or a ground light?

It is surface mounted at ground level, so it suits a path edge, garden bed or the base of a wall rather than head-height mounting.

How tough is it?

It is powder-coated aluminium with an IK07 impact rating and a clear plastic diffuser.

What warranty is included?

A 3-year replacement warranty.