The Domus TURIN wall bracket is an exterior lantern on an upward S-arm 520mm high, 310mm out, die-cast aluminium with a moulded acrylic lens,taking one B22 bayonet lamp, in beige, black, burgundy, green or white.Made in Italy, assembled and powder coated in Australia.

This item is made to order

Domus builds this fitting to order and asks for up to 10 business days for productionbefore it ships. It is not picked off a shelf.

• That is the trade-off for the finish choice. The body is powder-coated in the colouryou pick after you order, which is why the range offers five rather than one stocked colour.
• Plan the lead time into the job. If it is needed for a handover, a settlement or abooked electrician, tell us the date when you order and we will confirm the production window withDomus.
• Order the whole set together. On a property using several of these, a second orderplaced later starts its own ten days and a later powder-coat batch is not guaranteed to match thefirst.

It takes a B22 bayonet lamp, not an E27 screw. That isunusual here almost every other exterior fitting in this catalogue is E27 and it isexactly the detail people discover when the globe they bought will not go in.

B22 is the push-and-twist bayonet base still common across olderAustralian homes. E27 is the Edison screw. They are not interchangeable. Check thelamp you have, or ask us and we will supply the right one.

IP43 where this can and cannot go

Spraying water down to 60 from vertical lower than the IP44 or IP65most exterior fittings carry.

• Suitable under an eave, in a porch, on a verandah, or on a wall sheltered fromprevailing weather.
• Marginal on an open wall in driving rain, where water arrives closer tohorizontal.
• Not for hosing, coastal spray or sprinkler overspray.

If the wall is exposed, ask us for an IP44 or IP65 alternative the CLARO atIP65 is one.

One lantern, many configurations the reason to choose this range

The TURIN head is modular. The same lantern is offered as:

• A wall bracket this product, on an upward S-arm.
• A pillar mount and a post top.
• A pendant.
• A single head on posts of 1.32m, 1.96m or 2.37m;twin heads on 1.49m, 2.11m or 2.47m; and atriple head on 2.47m.

That is what lets an exterior scheme read as designed. Brackets either side ofthe door, a post top on the gate pier, twin heads down the drive all the same lantern.Tell us the configuration and we will quote it.

The upward S-arm and what it does to the light

• The arm carries the lantern up and away from the wall, so the light source sitsclear of the brickwork and throws outward as well as down.
• That makes it a lantern rather than a wall wash you get a pool at thebase of the wall and light across a path, not a graze up the surface.
• At 310mm of projection it is a substantial reach. Check it against a narrowpath, a car door or a gate swing.
• Mount at around 2m so the lantern sits above head height.

Choosing the lamp not supplied

• One B22. Behind a moulded acrylic lens the lamp is diffused, so shape does notmatter.
• Warm 27003000K.
• Around 8001,000lm suits a lantern at this size.
• Rated for enclosed fixtures and outdoor use.

Die-cast aluminium with a moulded acrylic lens, made in Italy,assembled and powder coated in Australia a locally applied coating is easier tomatch if a section is ever replaced. 220240V, hard-wired, licensedelectrician. Warranty 1 year.

Where it works

• Porches, verandahs and sheltered entry walls.
• Traditional and heritage houses particularly burgundy, beige or green.
• As part of a matched TURIN scheme with post tops and pillar mounts.
• IP43 ask us if the wall is exposed.
• B22 bayonet lamp, not E27, and not supplied.

Specifying it

520mm high, 310mm projection, upward S-arm,die-cast aluminium with a moulded acrylic lens, in beige, black, burgundy, green orwhite. Made in Italy; assembled and powder coated in Australia.One B22 bayonet lamp, NOT supplied B22, not E27; warm27003000K, 8001,000lm, enclosed-outdoor rated. 220240V AC,IP43 spraying water to 60 from vertical only; sheltered positions.The same lantern is available as a pillar mount, post top, pendant and single, twin or triplehead on posts. Warranty 1 year.

Supplied and supported by Lights For You.

Questions

What lamp does it take?

One B22 bayonet the push-and-twist base, not the E27 Edison screw. That is unusual here, since almost every other exterior fitting in this catalogue is E27, and it is exactly the detail people discover when the globe they bought will not go in. Check the lamp you have, or ask us and we will supply the right one.

Can it go on an exposed wall?

It is marginal. IP43 covers spraying water down to 60 from vertical, which is lower than the IP44 or IP65 most exterior fittings carry, and driving rain arrives closer to horizontal. It suits porches, verandahs, eaves and sheltered walls. If the wall is open to weather, ask us for an IP44 or IP65 alternative such as the CLARO.

Can I get the same lantern elsewhere on the property?

Yes that is the reason to choose this range. The TURIN head is also a pillar mount, a post top, a pendant, and a single, twin or triple head on posts from 1.32 to 2.47 metres. Brackets either side of the door, a post top on the gate pier and twin heads down the drive, all the same lantern, is what makes an exterior scheme read as designed.

How far does it stick out?

310mm, on a 520mm-high fitting. That is a substantial reach check it against a narrow path, a car door or a gate swing before you fix a position. Mount it around 2 metres so the lantern sits above head height.

What does the S-arm do to the light?

It carries the lantern up and away from the wall, so the source sits clear of the brickwork and throws outward as well as down. That makes it a lantern rather than a wall wash a pool at the base of the wall and light across the path, not a graze up the surface.

Which lamp should I fit?

One B22, warm 27003000K, around 800 to 1,000 lumens, rated for enclosed fixtures and outdoor use. Behind the moulded acrylic lens the lamp is diffused, so its shape does not matter.

Where is it made?

The die-cast aluminium and moulded acrylic components are made in Italy, and it is assembled and powder coated in Australia. The local coating is easier to match if a section is ever replaced.