The Veldi looks like an ordinary square up-and-down wall light and is not one: the body is 316 marine-grade stainless steel in every finish, including the black and the white, which are powder coated over the same stainless shell. That is the reason to choose it. Aluminium fittings carry a coastal exclusion; 316 stainless is the grade specified for exactly those positions. Two tri-colour GU10 globes are supplied, so the colour temperature stays a decision you can revisit.

Coastal, but not maintenance-free

316 stainless earns its place near the sea, and it still needs looking after. Havit requires regular cleaning of all 316 and 304 stainless fittings to stop tea staining the fine brown speckling that appears on stainless in salt-laden air and states plainly that the warranty does not cover tea staining. A wipe-down on the same schedule as the windows is usually enough; Havit sells a stainless maintenance kit for fittings that have been left too long. This is a condition of ownership rather than a defect, and it is worth knowing before the first summer rather than after it.

Where it works

• Coastal entries and beach-house facades where an aluminium fitting is the wrong material.
• Pool surrounds and pool houses, where chlorine and splashing are constant.
• Covered entries and alfresco walls on any property, in the natural stainless or in black or white.
• Anywhere three finishes need to match across a facade without changing fitting.

Specifying it

Three part numbers, one fitting: black, white and natural 316 stainless, all at the same output. It runs on 240V AC with no driver, and as a Class1 fitting the earth goes on first. The two supplied 5W GU10 globes make 10W in total 540lm at 3000K, 570lm at 4000K and 600lm at 5500K, which Havit publishes per head as 270, 285 and 300lm. Colour temperature is switched on the globe itself: take the cover off, slide the switch on the side of each globe, refit. The GU10 socket accepts up to 35W per globe and takes no other base. IP54 and IK08, with clear glass.

Installing it so the warranty survives

IP54 means splashing, not weather, so the Veldi still wants a sheltered wall even in stainless the material answers corrosion, not water ingress. Seal every hole in the base plate including the cable entry, run silicone around the edge of the fitting, and make sure all o-rings and seals are seated: Havit makes that a warranty condition. Then put the fitting on a cleaning routine.

Lights For You stocks all three Veldi finishes, and the pair of globes is in the box with each one.

Questions

Are the black and white versions stainless too?

Yes. All three part numbers are 316 stainless steel; the black and white are powder coated over the same shell.

Does it need a driver?

No 240V AC direct to mains, with an earth, as a Class1 fitting.

Are globes supplied?

Yes, two 5W tri-colour GU10 LED globes.

How bright is it?

10W in total: 540lm at 3000K, 570lm at 4000K and 600lm at 5500K across both heads.

What is tea staining and does it affect the warranty?

It is the fine brown discolouration that forms on stainless steel in salt-laden air. Havit requires regular cleaning maintenance on all 316 and 304 stainless fittings to prevent it, and the warranty does not cover tea staining.

Can I fit a brighter globe?

Up to 35W per globe. Never exceed the wattage printed on the fitting.

Does IP54 mean it can face the weather?

No. IP54 covers splashing, so it belongs under an eave or another sheltered position the stainless answers corrosion, not water ingress.

Is it dimmable?

Not with the globes supplied.